i've been doing some research on the same request you have. 30 gallon rimless. unless you are going to get a custom acrylic, you will have to do the drilling yourself. i do not know of any manufacturer that does this.
the custom acrylics for 30 gallons will have to be at least 3/4" thick and run you at least ~$300 give or take. it won't be cheap. however they can usually put the holes. in as part of the package.
truvu mass produces their tanks, and they can put the holes in for you in their 30 gallons for about $8 a hole. they run cheaper but they will not be 3/4" thick. the build quality is a little low, but i think you'll be just fine. oh, and they won't be rimless. that's how they can get away with thinner acrylic they use
|