|
Mark,
I only needed 2 GFCIs, one for each circuit. They are the first outlet on each circuit and all of the other standard outlets are daisy changed through them so all of the outlets are protected by the GFCIs. On the back of the GFCI there are 2 sets of terminals; one is LINE and the other is LOAD. LINE is where the main line comming in connects to. Any standard outlets or switches or whatever is wired to the LOAD terminal is then protected by the GFCI. This saves a lot of money considering GFCIs cost around $10 each and standard outlets cost around .40 cents each.
- Jeremy
|