|
I bought the icecap ato and have had it running for about two weeks now. I'm very happy with it! The only issue I had was getting the pump to run for the first time after initial setup. I disassembled and reassembled the pump, and it's worked fine since then (not a big deal, I've had to do this on several pieces of new equipment on my other FW tanks). The led lighting doesn't seem to mess with it at all. The bracket holding the sensor is smaller than I thought it would be, so it really isn't that noticeable in the tank. It keeps the water line just above the black trim. I still may end up trimming the inside of the black trim to raise the water line about 1/2-3/4" so it is even with the bottom of my aquaclear 50 HOB (I use it for my chemical media since I don't have a sump). The waterfall effect from the filter gets on my nerves due to the bubbles it makes in the display. Very happy with this ato! Thanks for the tip, zooman!
|