Reef Central Online Community - View Single Post

Austinchap · 10/30/2011, 12:55 PM

Next i knew i wanted to run a fuge in the back so i had to get rid of some of the paint on the back wall. Wish i would have taken more of this but its very easy to do.

I first taped the area off that i wanted to be clear. I then took a razor and traced lightly around the perimeter of the tape. You then turn the blade on its side and start to remove the paint which will come off like a sticker.

10/30/2011, 12:55 PM	#2
Austinchap Registered Member Join Date: Oct 2011 Posts: 119	*Next i knew i wanted to run a fuge in the back so i had to get rid of some of the paint on the back wall. Wish i would have taken more of this but its very easy to do.* I first taped the area off that i wanted to be clear. I then took a razor and traced lightly around the perimeter of the tape. You then turn the blade on its side and start to remove the paint which will come off like a sticker. Last edited by Austinchap; 10/30/2011 at 01:01 PM.