Quote:
Originally Posted by Maticed
no I mean water is coming out of the hole in the red pipe that goes to the air silencer (where the red air hose from the pump is going in). I have a red sea reefer 450 and the water level is too high so I bought a skimmer stand. My double cone 180 with speedy pump now sits in 20 cm of water but I have to adjust the pump to 34-36 watts to get the bubbles to the neck of the skimmer.
|
I think you need to take the pump apart and inspect the impeller. Also make sure there are no blockages in the venturi intake at the pump. Cap off the ozone port as well. And also make sure you rinse and dry out the foam filter in the silencer. To get the bubbles up, you need to close the wedge pipe more. That is how you adjust the level inside the skimmer. Not with the pump speed. The pump speed is used to get the most dense foam. I’d suggest 18-22 watts as a starting point. You may however need to increase the sump depth a bit. I’d suggest 8.5”-9” of depth.
__________________
Director Customer Support Royal Exclusiv USA
For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745
Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476
Last edited by slief; 03/17/2018 at 03:07 PM.
|