|
1. yes...
2. it depends... on the firmwareversion the fixture has. It might be necessary to update but check with your retailer or Vertex.
Some Info:
First of all, IMPORTANT!!!!
What ever you do, do it without the light is connected to a power source. Unplug the connection between the light and the power supplies before doing anything else!!!!!
Please check if you have the proper installation Tool. It’s kind of a plastic press device.
If a module is not working properly after installation, first check the position by replacing it a little bit more up and/or down so the piercing contacts are hitting the power cable inside
If you have more than one power supply, be sure to connect first all power supplies to the splitter box and after that you connect the light with the splitter box.
If you try to install them without the proper plastic installation tool, you might bend the board which can result in damages...
Hope that was from help for you.
Take care
Nico
Gesendet von iPhone mit Tapatalk
|