Hey guys,
Thanks for your messages and yours compliments.
The skimmer is still off because it still produce too much foam, I guess it's because of Nitrites which is start to up and the new water... Hope it will works properly during the week !
Yesterday, I've set the APEX and configure the EB8 to manage different stuff:
- Zeomatic: the big pump is working every 2 hours during 2 minutes.
- Lighting: Light on at 12:00 and light off at 22:00.
- Skimmer: Off when the return pump is off and On 3 minutes after the return pump is back on.
- Heater: keep the temp between 25.5 and 26 °C
I've also set the WXM Module and configure the two MP40W QD based on the WWC 2 Pump Program with Constant and Reefcrest modes. I'm pretty happy with the flow for the moment, will see if everythings is ok when livestock will be there
If I have enough time today, the Dastaco will be plug and configured
If you guys have some advices of somethings else which can help me, don't hesitate
