aqutronica and calceam reactor

TRIGER · 03/26/2012, 09:30 PM

just bought a deltec calceam reactor just wandering how to set my aqutronicap to control it what is the best way to do this got the co2 the solonide and the probe any help would be apreshated with this

AQT · 03/27/2012, 01:58 AM

I'll try to make for you a nice explanation as I made for the top up! :-)

AQT · 03/27/2012, 04:06 AM

I don't know why but i'm not able to paste and copy here the scheme of the explanation i did for you... so, I've sent it to your e-mail address.
Take care
Davide

gasman059 · 03/27/2012, 08:48 AM

Set a reference value for the solenoid plug. Lets say 6.1 ph(probe inside your reactor) on at everything above the reference and off when it hits 6.1.( with some give at lets say .2-.4 changes)

Hope this helps

TRIGER · 03/28/2012, 11:50 AM

hi thank u very much havent got ur email yet thanks again

AQT · 03/29/2012, 04:44 AM

mmm... strange, I've sent it. Ok, I will re-sent !
Davide

TRIGER · 03/29/2012, 09:51 AM

hi thank u for the down loads only got the top up thow no calceam reactor thow

AQT · 03/30/2012, 01:10 AM

In the e-mail I've sent yesterday there were two file: 1 PDF for the top up and 1 word for the calcium reactor. Please recheck the e-mail you got from me yesterday.
Davide

TRIGER · 03/30/2012, 08:21 PM

got then thank u very much

03/26/2012, 09:30 PM	#1
TRIGER Registered Member Join Date: Aug 2005 Location: y0rkshire Posts: 194	aqutronica and calceam reactor just bought a deltec calceam reactor just wandering how to set my aqutronicap to control it what is the best way to do this got the co2 the solonide and the probe any help would be apreshated with this

03/27/2012, 08:48 AM	#4
gasman059 The OG mad scientist Join Date: Jul 2006 Location: SOFLA Posts: 10,518	Set a reference value for the solenoid plug. Lets say 6.1 ph(probe inside your reactor) on at everything above the reference and off when it hits 6.1.( with some give at lets say .2-.4 changes) Hope this helps __________________ There's a fine line between "hobby" and "mental illness". 1985-present Current Tank Info: taking a break from the madness!

03/27/2012, 01:58 AM	#2
AQT Registered Member Join Date: Nov 2011 Location: Italy Posts: 159	I'll try to make for you a nice explanation as I made for the top up! :-)

03/27/2012, 04:06 AM	#3
AQT Registered Member Join Date: Nov 2011 Location: Italy Posts: 159	I don't know why but i'm not able to paste and copy here the scheme of the explanation i did for you... so, I've sent it to your e-mail address. Take care Davide

03/28/2012, 11:50 AM	#5
TRIGER Registered Member Join Date: Aug 2005 Location: y0rkshire Posts: 194	hi thank u very much havent got ur email yet thanks again

03/29/2012, 04:44 AM	#6
AQT Registered Member Join Date: Nov 2011 Location: Italy Posts: 159	mmm... strange, I've sent it. Ok, I will re-sent ! Davide

03/29/2012, 09:51 AM	#7
TRIGER Registered Member Join Date: Aug 2005 Location: y0rkshire Posts: 194	hi thank u for the down loads only got the top up thow no calceam reactor thow

03/30/2012, 01:10 AM	#8
AQT Registered Member Join Date: Nov 2011 Location: Italy Posts: 159	In the e-mail I've sent yesterday there were two file: 1 PDF for the top up and 1 word for the calcium reactor. Please recheck the e-mail you got from me yesterday. Davide

03/30/2012, 08:21 PM	#9
TRIGER Registered Member Join Date: Aug 2005 Location: y0rkshire Posts: 194	got then thank u very much