|
|
|
05/05/2012, 06:19 PM
|
#1 |
|
Registered Member
Join Date: Apr 2012
Posts: 13
|
securing vantec stealth fan in biocube 14
Just wondering what others have done to secure the stealth fan in the biocube hood. On the rapidled site it says to use tape to stick it to the hood beside the heatsink. Any other suggestions?
|
|
|
|
05/06/2012, 09:12 PM
|
#2 |
|
Trust me, I'm a pro.
Join Date: Nov 2003
Posts: 1,195
|
I am fitting the kit into a JBJ NC12. I used Velcro.
__________________
12g JBJ NC:RapidLED kit|inTank Media Basket|MJ900|Koralia Nano 240. 5g vivarium:Mexican Red-kneed Tarantula (Brachypelma smithi). |
|
|
|
|
05/07/2012, 08:16 PM
|
#3 |
|
Registered Member
Join Date: Apr 2012
Posts: 13
|
Good idea, thanks for the help!
|
|
|
|
|
05/11/2012, 10:49 PM
|
#4 |
|
Trust me, I'm a pro.
Join Date: Nov 2003
Posts: 1,195
|
No problem. I also used it to mount the drivers inside the stand. One long strip per driver is more than enough.
__________________
12g JBJ NC:RapidLED kit|inTank Media Basket|MJ900|Koralia Nano 240. 5g vivarium:Mexican Red-kneed Tarantula (Brachypelma smithi). |
|
|
|
 |
| Thread Tools | |
|
|
