How many triple puck kits

Ranger Daryl · 05/07/2012, 08:39 PM

How many triple puck kits should I plan to use above a 36"x18"x24" deep tank with the fixture about 12" above the water?

Rapid LED · 05/08/2012, 03:17 PM

You'll want about 36 LEDs for a SPS dominated tank, ~28-30 total LEDs for a softies/LPS tank. You can try one kit for now and see how you like the light, if it's not enough you can always add more later.

Ranger Daryl · 05/08/2012, 08:23 PM

I guess I should have specified that it is a mix of SPS, LPS, and zoas. I will go with two for now, I can always dim them down with my apex. Is the drilled and tapped black heatsink with splash guard back in stock yet?

Rapid LED · 05/10/2012, 04:53 PM

The normal kit comes with an undrilled/untapped heatsink, if you don't mind having one of our other drilled/tapped heatsinks then you can order now and that's what we'll send (please note the heatsink isn't drilled/tapped to fit the pucks, just our normal LEDs so you wouldn't be able to screw the pucks down).

Ranger Daryl · 05/10/2012, 09:03 PM

So its the same heatsink just drilled or undrilled?

Rapid LED · 05/14/2012, 06:17 PM

That's right, the drilled heatsink isn't drilled for the triple puck so you'll essentially just ignore those holes.

05/07/2012, 08:39 PM	#1
Ranger Daryl Registered Member Join Date: Sep 2010 Posts: 19	How many triple puck kits How many triple puck kits should I plan to use above a 36"x18"x24" deep tank with the fixture about 12" above the water?

05/08/2012, 03:17 PM	#2
Rapid LED RC Sponsor Join Date: Oct 2010 Posts: 1,613	You'll want about 36 LEDs for a SPS dominated tank, ~28-30 total LEDs for a softies/LPS tank. You can try one kit for now and see how you like the light, if it's not enough you can always add more later.

05/08/2012, 08:23 PM	#3
Ranger Daryl Registered Member Join Date: Sep 2010 Posts: 19	I guess I should have specified that it is a mix of SPS, LPS, and zoas. I will go with two for now, I can always dim them down with my apex. Is the drilled and tapped black heatsink with splash guard back in stock yet?

05/10/2012, 04:53 PM	#4
Rapid LED RC Sponsor Join Date: Oct 2010 Posts: 1,613	The normal kit comes with an undrilled/untapped heatsink, if you don't mind having one of our other drilled/tapped heatsinks then you can order now and that's what we'll send (please note the heatsink isn't drilled/tapped to fit the pucks, just our normal LEDs so you wouldn't be able to screw the pucks down).

05/10/2012, 09:03 PM	#5
Ranger Daryl Registered Member Join Date: Sep 2010 Posts: 19	So its the same heatsink just drilled or undrilled?

05/14/2012, 06:17 PM	#6
Rapid LED RC Sponsor Join Date: Oct 2010 Posts: 1,613	That's right, the drilled heatsink isn't drilled for the triple puck so you'll essentially just ignore those holes.