Power outage during firmware update

GatorPharmD · 05/08/2012, 09:07 PM

The worst that could happen during a firmware update happened to me a few minutes ago. I should have never done a firmware update on a stormy night in south FL.

I found some instructions using a jumper to reset the P3 and install the firmware. I do not feel comfortable doing this.

I would appreciate if anyone in south FL could help with this if they have experience resetting the P3. Otherwise, I would have to ask Michael for instructions to service the unit.

Many thanks in advance.

ReefRockerLive · 05/08/2012, 09:24 PM

I would use the FR flash tool from the GHL website and go to the Profiluxsupport forum for a how-to video on using the flasher tool.

luisagos · 05/08/2012, 09:43 PM

Sorry to hear about this, hence why i have a UPS on my Profilux.
Read this.
http://forum.aquariumcomputer.com/sh...-update-failed

If the update with ProfiLuxControl failed it is possible to update with another tool

1. download http://support.aquariumcomputer.com/...oad.php?did=48
2. save it somewhere you will find it, no installation required
3. start "flash.exe"
4. select "MB91F467D" as controller, 4MHz, navigate to the firmware file (click "open")
5. check the interface (under "set environment")
6. disconnect ProfiLux 3 from power (it is not necessary to open the enclosure and to set a jumper like it was ProfiLux II!)
7. now click "full operation" - ProfiLux still has no power!
8. plug in the DC-connector - ProfiLux has now power again and the download should start

Hint: If the update with ProfiLuxControl failed then there is maybe something wrong with your connection from PC to ProfiLux 3. Please ensure that your connection is stable and reliable before attempting to update with ProfiLuxControl or this tool, e.g. check the USB driver and update it if possible.

GatorPharmD · 05/08/2012, 10:40 PM

luisagos, thank you for the information. I could not do the reset via USB, steps 7 and 8 did not work. I think the USB connection via the VMWare fusion is not stable enough to allow this. I do not have a PC, I need to find one to do the reset using the RS232 cable.

AQD_ottawa · 05/09/2012, 07:19 AM

I have replied on the support forum

this is me · 05/09/2012, 08:08 AM

Tony,
Sorry to hear about your misfortune with the Profilux. Good luck with resetting your controller. I haven't yet dealt with this kind scenario so I cannot offer you any help.

GatorPharmD · 05/09/2012, 11:36 AM

I am up and running.

Many thanks to Michael and everyone who provided guidance here. When I first read the instructions last night I was very concerned about being able to reset the P3 - I did not sleep well last night. I followed the links posted here and watched Michael's video. I started working very early so I could go out during lunch to purchased the RS232 to USB cable and a laptop that I will dedicate mostly to the aquarium. The reset was seamless just as Michael showed in the video.

The support from fellow aquarists and Michael has been, as always, impeccable and could not have been any faster.

Thank you all.

BigAl2007 · 05/09/2012, 01:14 PM

That's GREAT news Tony!! I'm glad to hear it's all up and running now. WAY TO GO!!

05/08/2012, 09:07 PM	#1
GatorPharmD Registered Member Join Date: Dec 2009 Location: South FL Posts: 478	Power outage during firmware update The worst that could happen during a firmware update happened to me a few minutes ago. I should have never done a firmware update on a stormy night in south FL. I found some instructions using a jumper to reset the P3 and install the firmware. I do not feel comfortable doing this. I would appreciate if anyone in south FL could help with this if they have experience resetting the P3. Otherwise, I would have to ask Michael for instructions to service the unit. Many thanks in advance. __________________ Tony Current Tank Info: Elos MIDI - automated control by Profilux 3

05/08/2012, 09:24 PM	#2
ReefRockerLive Premium Member Join Date: Nov 2003 Location: Derby,CT Posts: 2,547 Blog Entries: 1	I would use the FR flash tool from the GHL website and go to the Profiluxsupport forum for a how-to video on using the flasher tool. __________________ ...A hobby like no other, fulfilling, frustrating, and expensive! Current Tank Info: 67g Rimless-Profilux 3ex, GHL Mitras LED, 2x Tunze 6105, FM Ultraskim 2, Ultralith

05/08/2012, 10:40 PM	#4
GatorPharmD Registered Member Join Date: Dec 2009 Location: South FL Posts: 478	luisagos, thank you for the information. I could not do the reset via USB, steps 7 and 8 did not work. I think the USB connection via the VMWare fusion is not stable enough to allow this. I do not have a PC, I need to find one to do the reset using the RS232 cable. __________________ Tony Current Tank Info: Elos MIDI - automated control by Profilux 3

05/09/2012, 07:19 AM	#5
AQD_ottawa RC Sponsor Join Date: Sep 2007 Location: Canada Posts: 7,923 Blog Entries: 26	I have replied on the support forum __________________ GHL ProfiLux Master Distributors Ecotech Marine Canadian Distribution [email protected] GHL ProfiLux Technical support www.profiluxsupport.com Current Tank Info: 36"x32"x24" with remote basement sump fully GHL configured with Mitras and powered by Ecotech pumps

05/09/2012, 08:08 AM	#6
this is me Registered Member Join Date: Jul 2003 Location: MA Posts: 3,707	Tony, Sorry to hear about your misfortune with the Profilux. Good luck with resetting your controller. I haven't yet dealt with this kind scenario so I cannot offer you any help. __________________ Nick When a man talks dirty to a woman, it's sexual harassment. When a woman talks dirty to a man, it's $4.95 per minute. Current Tank Info: -Elos System 70 -Elos Planet II 14K 250W DE 4x24W T5 -GHL Profilux IIIex

05/08/2012, 09:43 PM	#3
luisagos Registered Member Join Date: Nov 2008 Location: Florida Posts: 826	Sorry to hear about this, hence why i have a UPS on my Profilux. Read this. http://forum.aquariumcomputer.com/sh...-update-failed If the update with ProfiLuxControl failed it is possible to update with another tool 1. download http://support.aquariumcomputer.com/...oad.php?did=48 2. save it somewhere you will find it, no installation required 3. start "flash.exe" 4. select "MB91F467D" as controller, 4MHz, navigate to the firmware file (click "open") 5. check the interface (under "set environment") 6. disconnect ProfiLux 3 from power (it is not necessary to open the enclosure and to set a jumper like it was ProfiLux II!) 7. now click "full operation" - ProfiLux still has no power! 8. plug in the DC-connector - ProfiLux has now power again and the download should start Hint: If the update with ProfiLuxControl failed then there is maybe something wrong with your connection from PC to ProfiLux 3. Please ensure that your connection is stable and reliable before attempting to update with ProfiLuxControl or this tool, e.g. check the USB driver and update it if possible.

05/09/2012, 11:36 AM	#7
GatorPharmD Registered Member Join Date: Dec 2009 Location: South FL Posts: 478	I am up and running. Many thanks to Michael and everyone who provided guidance here. When I first read the instructions last night I was very concerned about being able to reset the P3 - I did not sleep well last night. I followed the links posted here and watched Michael's video. I started working very early so I could go out during lunch to purchased the RS232 to USB cable and a laptop that I will dedicate mostly to the aquarium. The reset was seamless just as Michael showed in the video. The support from fellow aquarists and Michael has been, as always, impeccable and could not have been any faster. Thank you all. __________________ Tony Current Tank Info: Elos MIDI - automated control by Profilux 3

05/09/2012, 01:14 PM	#8
BigAl2007 Registered Member Join Date: Feb 2007 Location: Waynesville, NC USA Posts: 1,432	That's GREAT news Tony!! I'm glad to hear it's all up and running now. WAY TO GO!!