Maxspect Razor - Page 4

chris@CoralVue · 07/17/2012, 07:55 AM

Quote:

Originally Posted by rsg4

So around Aug 1?

Yes, we are expecting to receive our first shipment on or before August 1st.

Chris
CoralVue

David Grigor · 07/17/2012, 11:44 AM

While you probably don't know the answer, Will the first shipment be enough to qty to satisfy all the pre-orders. I pre-ordered back mid June from another site that was going to drop ship so I assume that means it will be coming from you.

chris@CoralVue · 07/17/2012, 02:16 PM

Quote:

Originally Posted by David Grigor

While you probably don't know the answer, Will the first shipment be enough to qty to satisfy all the pre-orders. I pre-ordered back mid June from another site that was going to drop ship so I assume that means it will be coming from you.

David,

The first shipment will not enough to satisfy all of the pre-orders, but we will be bringing in regular shipments every month to try and keep up with the demand.

Chris
CoralVue

fourzero · 07/17/2012, 04:42 PM

what is the warranty on this unit? I can't find a single mention of it anywhere on the coralvue site, or anywhere else on the internet..

chris@CoralVue · 07/17/2012, 05:12 PM

The Mazarra S has been discontinued and will be replaced by the Mazarra X, which will be available in October.

Chris
CoralVue

Dunk12 · 07/17/2012, 06:39 PM

How many should I get for a 7ft x 2ft x 2ft tank ?

chris@CoralVue · 07/17/2012, 06:48 PM

Quote:

Originally Posted by Dunk12

How many should I get for a 7ft x 2ft x 2ft tank ?

I recommend 3 of the 120W (20.5") Razors. Please see the attached photos for a reference.

Chris
CoralVue

synrg · 07/17/2012, 07:46 PM

Hey Chris, About to place a pre-order at Marine Depot. Did not see the hanging kit listed yet. Do you have the part number? Thanks!

rsg4 · 07/18/2012, 04:42 AM

Quote:

Originally Posted by synrg

Hey Chris, About to place a pre-order at Marine Depot. Did not see the hanging kit listed yet. Do you have the part number? Thanks!

I "think" it can use some of the hanging stuff from the mazarra line. I remember reading that some where.

dphansen · 07/18/2012, 08:19 AM

How about a 36" 65 gallon tank? Would one 27" be enough?

headstrong · 07/18/2012, 09:01 AM

only video I've found, not over water just yet:
http://www.youtube.com/watch?v=Y_uL4CNwXpY

adamfajge · 07/18/2012, 09:44 AM

Quote:

Originally Posted by chris@CoralVue

David,

The first shipment will not enough to satisfy all of the pre-orders, but we will be bringing in regular shipments every month to try and keep up with the demand.

Chris
CoralVue

Will the first shipment of pre-odered Razors have enough or will their not be enough for the pre orders? If there is not enough quantity for the pre orders then how long will the people have to wait for the pre-orders?

David Grigor · 07/18/2012, 10:12 AM

Adam, that was his answer to me on the same question I just asked.

The first shipment will not be enough to satisfy all pre-orders.

Sounds like at least 1 month possibly more after the first shipment.

So, I wouldn't make any firm dates of when tank will be up and running if for a new tank. If for an upgrade, in the grand scheme of things really a months or two shouldn't matter much since we all have patience in this hobby right ?

adamfajge · 07/18/2012, 02:07 PM

I am waiting to replace my MH fixture. I figured I would not buy new MH bulbs so I am waiting here like everyone else. I was told middle to end of July from Chris

chris@CoralVue · 07/19/2012, 07:36 AM

Quote:

Originally Posted by synrg

Hey Chris, About to place a pre-order at Marine Depot. Did not see the hanging kit listed yet. Do you have the part number? Thanks!

The hanging kit is included with the Razor.

Chris
CoralVue

chris@CoralVue · 07/19/2012, 07:37 AM

Quote:

Originally Posted by dphansen

How about a 36" 65 gallon tank? Would one 27" be enough?

The 27" 160W Razor would be perfect for you 36" tank.

Chris
CoralVue

chris@CoralVue · 07/19/2012, 07:40 AM

Quote:

Originally Posted by adamfajge

I am waiting to replace my MH fixture. I figured I would not buy new MH bulbs so I am waiting here like everyone else. I was told middle to end of July from Chris

Confirming the end of July for the arrival of the 160W 27" Razor. The 120W 20.5" version will follow about 4 weeks later.

Chris
CoralVue

UniReef · 07/19/2012, 09:36 AM

Quote:

Originally Posted by headstrong

only video I've found, not over water just yet:
http://www.youtube.com/watch?v=Y_uL4CNwXpY

The video posted on YouTube by SaltySupply shows the tank top mounting. The length of the legs on this mounting look like they are more than the 3.5" as shown on the CoralVue page http://coralvue.com/r420r-mounting/.

Chris, what is the height really going to be for the tank top mounting?

chris@CoralVue · 07/19/2012, 10:22 AM

Quote:

Originally Posted by UniReef

The video posted on YouTube by SaltySupply shows the tank top mounting. The length of the legs on this mounting look like they are more than the 3.5" as shown on the CoralVue page http://coralvue.com/r420r-mounting/.

Chris, what is the height really going to be for the tank top mounting?

The actual height of the Razor with the mounting legs is 6.5", we are fixing the photos on the website and I'll post an link when available.

Chris
CoralVue

Ellery · 07/30/2012, 08:28 PM

Chris@CoralVue,

Are there any customer replaceable parts in the Razor just like the P-Series? I'm trying to get the right fixture over a standard 125g with center brace in a SPS tank. Hard time to make a decision these days.

Rockys_Pride · 07/30/2012, 10:52 PM

I have a 24x24x24 cube, I'm looking to replace my 250w mh, would the 120w or 160w version be better? I keep sps and clams.

I'd like the 160w version and I guess I'll sawzall the extra 3" off since it's going in a canopy?

chris@CoralVue · 07/31/2012, 07:07 AM

Quote:

Originally Posted by Rockys_Pride

I have a 24x24x24 cube, I'm looking to replace my 250w mh, would the 120w or 160w version be better? I keep sps and clams.

I'd like the 160w version and I guess I'll sawzall the extra 3" off since it's going in a canopy?

I would go with the 120 watt 20.5" Razor, you'll ruin the light if you use a sawzall on it.

Chris
CoralVue

synrg · 07/31/2012, 07:18 AM

Pre-Ordered Razor 160W 16000k and it is being dropped shipped directly to me. Should they start shipping today? Where are they shipping from. Anxiously awaiting... =)

Jeremy@CoralVue · 07/31/2012, 09:57 AM

Congrats synrg. The Razors are due to arrive to our location next week.

Jeremy@CoralVue · 07/31/2012, 09:59 AM

Quote:

Originally Posted by Ellery

Chris@CoralVue,

Are there any customer replaceable parts in the Razor just like the P-Series? I'm trying to get the right fixture over a standard 125g with center brace in a SPS tank. Hard time to make a decision these days.

The Razors do not have the customization that is available with the Mazarras. What are the dimensions of your 120gal?

07/17/2012, 11:44 AM	#77
David Grigor Registered Member Join Date: Jan 2000 Location: Brooklyn Center, MN USA Posts: 5,030	While you probably don't know the answer, Will the first shipment be enough to qty to satisfy all the pre-orders. I pre-ordered back mid June from another site that was going to drop ship so I assume that means it will be coming from you. __________________ I may be dumb but I'm not stupid.... Current Tank Info: 180g mixed reef show tank w/ a 140g ( 8'X3') frag tank/sump; 29g RBTA tank; 20L zoanthid tank

07/18/2012, 10:12 AM	#88
David Grigor Registered Member Join Date: Jan 2000 Location: Brooklyn Center, MN USA Posts: 5,030	Adam, that was his answer to me on the same question I just asked. The first shipment will not be enough to satisfy all pre-orders. Sounds like at least 1 month possibly more after the first shipment. So, I wouldn't make any firm dates of when tank will be up and running if for a new tank. If for an upgrade, in the grand scheme of things really a months or two shouldn't matter much since we all have patience in this hobby right ? __________________ I may be dumb but I'm not stupid.... Current Tank Info: 180g mixed reef show tank w/ a 140g ( 8'X3') frag tank/sump; 29g RBTA tank; 20L zoanthid tank

07/30/2012, 08:28 PM	#95
Ellery Pure Genuis Join Date: Aug 2006 Location: Rochester, NY Posts: 660	Chris@CoralVue, Are there any customer replaceable parts in the Razor just like the P-Series? I'm trying to get the right fixture over a standard 125g with center brace in a SPS tank. Hard time to make a decision these days. __________________ ---------------------------------------- part-time jacque-cousteau Full Time money spender. Current Tank Info: 125G Reef+ 90G FOWLR + 30 G Aquaculture + 20G sump

07/30/2012, 10:52 PM	#96
Rockys_Pride Registered Member Join Date: Jul 2010 Location: colorado Posts: 495	I have a 24x24x24 cube, I'm looking to replace my 250w mh, would the 120w or 160w version be better? I keep sps and clams. I'd like the 160w version and I guess I'll sawzall the extra 3" off since it's going in a canopy? Last edited by Rockys_Pride; 07/30/2012 at 11:08 PM.

07/31/2012, 09:57 AM	#99
Jeremy@CoralVue RC Sponsor Join Date: Jan 2011 Posts: 1,507	Congrats synrg. The Razors are due to arrive to our location next week. __________________ CoralVue Aquarium Products Maxspect \| Reef Octopus Phone (985)781-9078 \ Follow us on facebook \ Visit us at www.CoralVue.com Current Tank Info: 220gal Mixed Reef, Super Reef Octopus XP3000 ext, 2 Lumen Bright LG, Selectable LuxCore Ballasts, Closed Loop powered by Water Blaster 7000, Apex Controller

07/17/2012, 04:42 PM	#79
fourzero Registered Member Join Date: Jun 2007 Location: Bakersfield, CA Posts: 110	what is the warranty on this unit? I can't find a single mention of it anywhere on the coralvue site, or anywhere else on the internet..

07/17/2012, 05:12 PM	#80
chris@CoralVue RC Sponsor Join Date: Jan 2011 Location: New Jersey Posts: 373	The Mazarra S has been discontinued and will be replaced by the Mazarra X, which will be available in October. Chris CoralVue

07/17/2012, 06:39 PM	#81
Dunk12 Registered Member Join Date: Jul 2012 Posts: 1	How many should I get for a 7ft x 2ft x 2ft tank ?

07/17/2012, 07:46 PM	#83
synrg Registered Member Join Date: Nov 2006 Location: Orlando, FL Posts: 70	Hey Chris, About to place a pre-order at Marine Depot. Did not see the hanging kit listed yet. Do you have the part number? Thanks!

07/18/2012, 08:19 AM	#85
dphansen Registered Member Join Date: Dec 2003 Posts: 23	How about a 36" 65 gallon tank? Would one 27" be enough?

07/18/2012, 09:01 AM	#86
headstrong Registered Member Join Date: Jun 2008 Posts: 34	only video I've found, not over water just yet: http://www.youtube.com/watch?v=Y_uL4CNwXpY

07/18/2012, 02:07 PM	#89
adamfajge Registered Member. Join Date: Nov 2006 Posts: 190	I am waiting to replace my MH fixture. I figured I would not buy new MH bulbs so I am waiting here like everyone else. I was told middle to end of July from Chris

07/31/2012, 07:18 AM	#98
synrg Registered Member Join Date: Nov 2006 Location: Orlando, FL Posts: 70	Pre-Ordered Razor 160W 16000k and it is being dropped shipped directly to me. Should they start shipping today? Where are they shipping from. Anxiously awaiting... =)