|
![]() |
|
|
#1 |
|
Registered Member
Join Date: Feb 2011
Location: Urbana, IL
Posts: 138
|
DM-1 dual inline TDS meter Err
Hi, I have a dual inline TDS meter for a Kent Maxxima RO system. On both the inline and outline it is reading Err. I replaced the batteries, and cleaned the probes, but am still getting an Err reading, does anyone have any other ideas of what my problem could be or something else I could do, I'm all ears.
Thanks |
|
|
|
|
|
#2 |
|
RC Sponsor
![]() Join Date: Sep 2006
Location: Cincinnati, Ohio
Posts: 4,271
|
You've probably accidentally disconnected the sensor cables. It’s an easy problem to fix. Gently push on the probe wire plug to reseat it. You'll likely feel it pop back into place. Within a few seconds of doing that, you'll see the readout change from ERR.
The ERR reading will appear if the sensor cables are disconnected or if the reading is higher than the range of the meter (which is unlikely, since it’s 9990 ppm). Russ
__________________
Have you visited Buckeye recently? GFO (pellet, granular, and HC), VorTech pumps, refractometers, 2-part additives, ROX 0.8 GAC, and more! Reef Central S P O N S O R RO/DI Systems and Supplies at www.BuckeyeFieldSupply.com [email protected] HM Digital Master Distributor Hanna Instruments Master Distributor Salifert Master Distributor AQUA UV Master Distributor
Current Tank Info: 300 g mixed reef system |
|
|
|
![]() |
| Thread Tools | |
|
|