|
03/07/2013, 05:37 AM | #101 |
Swede living in Finland
Join Date: Jan 2005
Location: Finland
Posts: 221
|
Interesting read.
It would be great if someone with a stable tank would alter the KH over a period of around 4 weeks and document possible changes in color. For example from 8 up to 10 (and then back again). All other parameters kept unchanged as far as possible. Anyone up for the task ? In my experience dosing iron will intensify the green coloration in many sps species. |
03/07/2013, 01:49 PM | #102 | |
Registered Member
Join Date: Nov 2009
Location: Fleming G.A.
Posts: 144
|
Quote:
|
|
03/29/2013, 01:44 AM | #103 |
Ultimate Reefer
Join Date: Apr 2002
Location: London, UK
Posts: 8,540
|
Can the earlier posters post updates as to how their corals are doing? -what actions did they do that led to improved coloration or less paleness in their sps?
|
03/31/2013, 04:06 PM | #104 |
Moved On
Join Date: Oct 2009
Location: long island
Posts: 1,613
|
Interesting
|
04/01/2013, 01:58 AM | #105 |
Premium Member
Join Date: Jul 2011
Location: Gilleleje , Denmark
Posts: 161
|
Hi there
I did go from 10 to 8 in alkalinity. All other parameters kept stable. Salt 1,028 Ph 8,0-8,2 No3 0,5 Po4 <0,03 Temp 24-26 Ca now stabil at 440 Mg 1450 It did do a lot for the colors, but even more with growthrate and PE on my SPS. It took a while for me to finetune the system(ca went to 480) but I have "found" my KH values :-) Very happy to see this huge change, for such small effort..... So thank you very much Kevinsquint and RC - this was better and cheaper than new products from company X Peder
__________________
Regards Peder http://www.advancedaquarist.com/blog/the-gilleleje-denmark-in-wall-reef-aquarium 30 years experience, 400+Gallon, 100+ SPS 25+ LPS, and about 15 fish - I love Corals. Current Tank Info: SPS dominated ULNS Reef Last edited by Pederreefnerd; 04/01/2013 at 02:57 AM. |
04/01/2013, 07:47 AM | #106 |
Registered Member
Join Date: Feb 2008
Location: East Stroudsburg, Pa
Posts: 668
|
I see alot of you are claiming extremely low nitrate and phosphate levels. Im telling you now if you are using Salifert kits to test both, you are wasting your time. Nitrates almost always test to 0 and the P04 kit is way off.
IMO P04 hanna checker for phosphate and a red sea nitrate test kit are best...most accurate. Just my 2 cheap cents.
__________________
HENRYSTYLE - That Henry Guy Current Tank Info: 30g frag tank/120g sps dominant reef |
04/02/2013, 01:55 PM | #107 |
Registered Member
Join Date: Jun 2012
Location: Austin / Port Aransas, TX
Posts: 1,479
|
I think a lot of people are going to have to make changes in their systems to include more nutrients in the water column if they want to run these extreme LED systems that are far brighter than MH systems ever were. I have been experimenting w/ LED - VHO-MH comparisons on my frag tanks. All tanks have a PAR at the surface of ~ 55 and are linked so nutrient levels are basically the same on all three tanks. I run middle of the road on NO3 < .25 and PO4 <.02 w/ a margin of error on both at .02 as I utilize RS Pro testing equipment. So levels could be at times as high as .04 or as low as ~ 0.0, but I believe the avg to be as stated.
I was most interested in growth rates and what I have found is for growth nothing beats MH @ 6500kw, and the jury is still out for best coloration. I have seen nothing to indicate that any of the 3 types of lighting source proved to have any effect on color growth. Not to be confused w/ viewing the corals. But in setting up the system, I did have to initially reduce the intensity of the LED source as it initially produced nearly 70PAR at the surface and hurt the corals coming off the MH system. Now that everything has been in equilibrium for 3 months I will also begin to look at colors and report back to thread in the future after making some small changes in PAR equal to 5 PAR +/- while holding nutrient levels = .
__________________
Merry Skerry Current Tank Info: 1 G Nano jellyfish to 1200 G Bull Nose FOWLR featuring large Holacanthus and Pomacanthus |
04/02/2013, 02:05 PM | #108 |
Registered Member
Join Date: Apr 2003
Location: Durham, NC
Posts: 739
|
are we talking about inorganic nutrient levels or organic nutrient levels?
i have no doubt that the more light one puts over a tank the more organically bound phosphates need to be added. i do not think the inorganic phosphates levels matter as long as they are within oligotrophic levels. a PO4 level of 0.02 is still way above the oligotrophic level of 0.009ppm. G~
__________________
Friends don't let friends use refugiums. Current Tank Info: Not dead yet. |
04/03/2013, 08:22 PM | #109 | |
Registered Member
Join Date: Jan 2002
Location: NY,NY
Posts: 2,072
|
Quote:
|
|
04/03/2013, 08:31 PM | #110 | |
Registered Member
Join Date: Jan 2002
Location: NY,NY
Posts: 2,072
|
Quote:
Your observations are in direct opposition to actual research that has been published so if you have any photo evidence to support this statement I would be most interested. Also, how do you define LEDs as being "brighter". What meter did you use? Is it calibrated for LEDs? The problem is that the primary meter on the market is an Apogee, and that particular manufacturer in no way envisioned the advent of LEDs and has built their meters using a smoothing algorithm that anticipates sunlight or fluorescent light. LED light is not properly measured. Plus we have little knowledge on what happens when we flood corals with specific wavelengths instead of a broad spectrum of wavelengths. My primary point here is that I feel like you are making comments with a sense of authority that are in no way yet explained in scientific literature. You may very well be right, but I remain doubtful. Now as to the OP My tank has varied from 12 to 5 dKH and the color did not change. I do believe that stable alkalinity is a key to colorful coral, but raising alkalinity above that which exists in nature does not change the color of coral of that I am sure. Joe P.S. My tank . . . Last edited by JPMagyar; 04/03/2013 at 08:37 PM. |
|
04/04/2013, 05:58 AM | #111 | |
Registered Member
Join Date: Apr 2011
Location: Pittsburgh
Posts: 2,174
|
Quote:
The last sentence I agree with completely.
__________________
Jer Current Tank Info: 40b basement sump, 40b refugium, 30g frag |
|
04/05/2013, 03:23 AM | #112 | |
Registered Member
Join Date: Feb 2001
Location: Hong Kong
Posts: 1,709
|
Quote:
You have a very nice tank, well done! PS Your homepage link does not work, do you have a build thread on RC?
__________________
NEVER get eye level with an infants anus! New build, planning stages. 30 x 20 x 20", Geisemann Spectra 250W with Radium, Profilux controller, Profilux doser 2, Fluval SP4 return pump, Life Reef 28 |
|
04/05/2013, 06:38 AM | #113 | |
Premium Member
Join Date: Jul 2011
Location: Gilleleje , Denmark
Posts: 161
|
Quote:
__________________
Regards Peder http://www.advancedaquarist.com/blog/the-gilleleje-denmark-in-wall-reef-aquarium 30 years experience, 400+Gallon, 100+ SPS 25+ LPS, and about 15 fish - I love Corals. Current Tank Info: SPS dominated ULNS Reef |
|
04/05/2013, 04:43 PM | #114 | |
Registered Member
Join Date: Jan 2005
Location: Lynchburg, Va
Posts: 2,963
|
Quote:
JP that is one of the nicest tanks I have ever seen! I come back and look at that tank atleast 4 times a week! Come set my tank up, lol! I know you were helping me on my thread and I appreciate it! Hope I can get mine that nice! In cycle now |
|
04/05/2013, 05:40 PM | #115 |
Registered Member
Join Date: Jun 2002
Location: Palm Bay, FL
Posts: 152
|
|
04/09/2013, 08:48 AM | #116 |
Registered Member
Join Date: Apr 2012
Location: St. Cloud, MN
Posts: 140
|
Still trying to find the sweet spot for my reef.. I have good color on my SPS, but I want AMAZING, DEEP, RICH color.
6x54w ATI Powermodule 75g display Big Skimmer Filter Sock Live Rock/Chaeto Phosphates: .05 via Hanna checker Alk: 8.0 via Hanna checker Nitrates: Dont test for Nitrates ZERO bad algae growth anywhere. Wondering if I should try A). More fish (I only have 6) B). Feed more, nutrient export more. C). Feed less, thus lower phosphates to undetectable. Last edited by .Marshall; 04/09/2013 at 09:27 AM. |
04/09/2013, 09:04 AM | #117 |
Registered Member
Join Date: Apr 2003
Location: Durham, NC
Posts: 739
|
with a substrate you are going to have export more issues. the substrate is going to be your largest and best phosphate sink. you will always be battling the feed enough to make the corals happy, but not to much to raise the phosphate leaching from the substrate above mesotrophic/oligotrophic levels.
my vote would be B, unless A also means you will be feeding more food, then either of those choices should help in getting more food to the corals. G~
__________________
Friends don't let friends use refugiums. Current Tank Info: Not dead yet. |
04/09/2013, 09:16 AM | #118 |
Registered Member
Join Date: Jan 2005
Location: Lynchburg, Va
Posts: 2,963
|
I have just redone my tank and used a 1" sand bed. I plan on cleaning some of the sand bed every week when I do my water change. Will def clean the top layer.
|
04/09/2013, 09:26 AM | #119 | |
Registered Member
Join Date: Apr 2012
Location: St. Cloud, MN
Posts: 140
|
Quote:
I guess if A I would be feeding a little more (volume not frequency) but not too much, its not like I would be adding another tang. I guess my question is if I raise phosphates, do you think the nice deep color will increase? I have more than enough light, im just questioning wheather I bring more light or back off the light a little bit to get that deep color. |
|
04/09/2013, 05:23 PM | #120 |
Registered Member
Join Date: Apr 2006
Posts: 252
|
great thread
I am using bioPlastic NO3=0 (salifert) Po4 =0.00 (hanna) Kh=7.3-7.7 (salifert) using CBalance to mantain KH,CA, MG levels some of my corals Paled and I am feeding a lot I start dosing AcroPower 3 weeks ago and it's helps but it's Insufficient I descided to decrease the Bioplastic in order to raise the No3 ,Po4 levels
__________________
Ultra Clean Rimless Tank http://www.reefcentral.com/forums/showthread.php?t=2112551 Current Tank Info: ultra clean rimless tank ,700 liter |
04/09/2013, 07:03 PM | #121 |
Registered Member
Join Date: Jan 2005
Location: Lynchburg, Va
Posts: 2,963
|
Any thing I should do to prep my tank for success? I am coming to the end of my cycle. NO3 are 2ppm, PO4 is .049ppm, Ammonia 0, nitrtaes 0, only thing I have added is a few hermits and snails. going to let them run around a few weeks then try a Chromis or two. I am going to start logging Calcium and Alk to try and keep steady. This is a great thread, thanks
|
04/09/2013, 07:51 PM | #122 | |
Registered Member
Join Date: Jan 2002
Location: CT
Posts: 299
|
First off great thread! Lots of good info here. I started following this thread back in January and have remained silent until I had some results to report.
Second, Joe that is an amazing tank and it is my hope my new tank will be as nice as yours, so I have been taking my time and making changes slowly. I commended your success. Truly amazing! Quote:
So I have a couple question with respect to your comment: 1) have you ever ran DKH levels above 11 for a period of 6 months or more? 2) If so what type of lighting were you using? Were you using LEDs? My results: On my old system, I ran 250MH, and kept DKh around 7-8. My SPS color was ok, probaly slightly better than average, but I was also some what of a slacker in terms of husbandry, mainly becuase of setup. When I designed this new system (built a new house, so it was easy to make things simple) my #1 goal was SPS color and being able to easily perform tasks. And I have acheieved that. But what killed me is that even though I was doing everything as I thought I should, when I added my first few SPS, color started to fade a couple months later, by December 2012 I was thoroughly frustrated. My new tank was setup in May of 2012. I added my first SPS corals in September-- a Green monti cap, a very hardy SPS coral and a Valida frag which had amazing color. These pieces were to be my test pieces! And until I knew that color would hold or improve, nothing else was to be added. My Dkh levels were maintained over 10.5 and mostly around 11.5. All my other tests (Ca, Mg, No3, Po4) were in check. But color was fading? That's when I really started researching all that I could find. My conclusion after reading many of the articles by Dana Riddle on AA in conjunction with this thread and many other threads on RC, my DKH had to be reduced and I also probably needed to reduce my photo period. In February I started tracking my result very closely and by March I was seeing color return. I will post a detailed account of what I did, but I feel the two things that I can attribute to my success is reducing my Alk levels and reducing photo period. I will try and post some pics of the Valida and Green monti. I will also post a detailed accounting of what I did and the test results. The test results will probably lead others to draw different conclusions--mainly that adding I2, Fe and part D red sea reef colors may have helped, but my coral coloration was already recovering well before I started dosing these supplements. Since starting these supplements, they may have helped. I should also note I have a reasonable bio load on the tank which I am relying on to help feed corals. I am not not feeding my corals directly. And I have read all of Borneman's stuff. This tank is striving to be ULNS. HTH others. Cheers! Brett
__________________
Brett - http://www.reefcentral.com/forums/showthread.php?t=2168765 Current Tank Info: Custom 240 starphire peninsula tank, 60 gal sump, BK 200 Super Marin, GEO 818 w/ AP electronic regulator, Radions, Apex controller. 40 gallon fuge, 40 gallon QT with 20 gallon sump Last edited by BrettH; 04/09/2013 at 08:30 PM. |
|
04/09/2013, 08:18 PM | #123 |
Registered Member
Join Date: Jan 2002
Location: CT
Posts: 299
|
Test Results
These results are only from January onward. Before this date, I had been testing weekly Alk, Ca, Mg, No3 and Po4. But I was not as diligent about noting the levels. I just tested and made adjustements as needed.
For Ca, Mg, and No3 I am using Salifert, for Alk and Po4 I am using Hanna. I recently purchased the Red Sea No3 test kit to see if it is any better than the Salifert. Also for I2, Fe and K I have been using Red Sea. I'll try and provide some shots of the corals tomorrow night. I have an SLR, but unfortunately I did not use it to snap any pictures of the corals when they faded. I only have some shots using my iPhone/iPad. I'll will use the SLR for these next shots.
__________________
Brett - http://www.reefcentral.com/forums/showthread.php?t=2168765 Current Tank Info: Custom 240 starphire peninsula tank, 60 gal sump, BK 200 Super Marin, GEO 818 w/ AP electronic regulator, Radions, Apex controller. 40 gallon fuge, 40 gallon QT with 20 gallon sump Last edited by BrettH; 04/09/2013 at 08:35 PM. Reason: added some info |
04/09/2013, 08:42 PM | #124 |
Registered Member
Join Date: Feb 2007
Location: Santa Monica, California, USA
Posts: 2,511
|
My theory on lower alk being better for color comes from scrubber experience: Strong scrubber growth (photosynthesis) can pull a lot of alk from the water, and likewise, a lack of alk can slow a scrubber down.
So, higher alk gives the symbiotic algae in the coral more ability to grow, and thus, a darker coloring. |
04/23/2013, 06:41 AM | #125 | |
Registered Member
Join Date: Jun 2012
Location: PA
Posts: 2,564
|
Quote:
I disagree and have a completely opposite experience. My Alk started around 7.9dKh and based on recommendations from this forum, I slowly raised my Alk from 7.9dKh to 9.89dKh over a period of about 45 days. In the same time period, I watched my corals bleach....all of them. After letting my Alk drop back to where I hold it now (~7.5dKh) all of the corals color has returned. All other parameters such as Calcium, pH, Temperature, Nitrate, Phosphate, etc has remained the same. So based on my experience, your statement cannot be applied as a blanked to all tanks. |
|
Thread Tools | |
|
|