|
10/05/2017, 08:12 AM | #1 |
Registered Member
Join Date: Nov 2009
Location: Evansville, IN
Posts: 1,864
|
ATI ICP test results
Any chemistry experts want to take a look at the numbers that ATI flagged as out of the acceptable range? I'm most interested in the aluminum levels which seem sky high. They recommend dosing strontium, but the levels don't seem terribly low, but I suppose that's a decent percentage gap since the concentration is low normally.
|
10/05/2017, 09:07 AM | #2 |
Registered Member
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
|
Running any of the "marine pure" type ceramic blocks,etc..?
They had an issue with aluminum.. Or an aluminum based phosphate binder?
__________________
Who me? |
10/05/2017, 09:12 AM | #3 |
Registered Member
Join Date: Nov 2009
Location: Evansville, IN
Posts: 1,864
|
Yeah, I've got a marine pure block. At what point do aluminum levels become harmful? I skimmed Randy's article on aluminum in the reef, but I couldn't figure out how to convert the units given by ATI to what Randy was using.
|
10/05/2017, 09:25 AM | #4 | |
Registered Member
Join Date: Apr 2016
Location: Central Nebraska
Posts: 3,190
|
Quote:
__________________
Pat Current Tank Info: 125 in-wall , 40b sump. 6 bulb T5. ASM G2 skimmer. LPS and leathers |
|
10/05/2017, 10:03 AM | #5 |
Registered Member
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
|
__________________
Who me? |
10/05/2017, 10:06 AM | #6 |
Registered Member
Join Date: Nov 2009
Location: Evansville, IN
Posts: 1,864
|
That's disappointing. BRS highly recommends these things. In their video series, I think they said they're putting the BRS 160 onto the Triton method. I wonder if they'll have similar aluminum issues.
|
10/05/2017, 10:18 AM | #7 |
Registered Member
Join Date: Sep 2003
Location: San Jose, CA
Posts: 6,499
|
I have had two of those blocks in my system for almost 2 years and my aluminum detection from icp is 0.08 within range of water in Fiji and other places. Maybe its because it's been in my tank so long the aluminum was extracted from water change? But so far they work as advertise i can't say for new blocks.
Sent from my iPhone using Tapatalk Pro |
10/05/2017, 10:20 AM | #8 |
Registered Member
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
|
Posts all over the place about this..
This forum and some on another2another reef forum.. One person removed the block and the ICP test results showed a decrease in aluminum,etc... BRS (Ryan) in more up to date posts has basically shown that the blocks are certainly causing increase aluminum levels and is skeptical of their use/performance,etc... in the first place..
__________________
Who me? |
10/05/2017, 10:56 AM | #9 |
Registered Member
Join Date: Nov 2009
Location: Evansville, IN
Posts: 1,864
|
Any thoughts on the strontium and iodine? I don't keep any softies other than zoas, but I do have a large derasa clam. I've heard they like iodine. Is the strontium level anything to be concerned about?
|
10/05/2017, 11:35 AM | #10 |
Registered Member
Join Date: Nov 2009
Location: Evansville, IN
Posts: 1,864
|
|
10/05/2017, 12:22 PM | #11 | |
Registered Member
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
|
Quote:
I personally would attempt to keep whatever levels I know about at or near oceanic levels..
__________________
Who me? |
|
10/05/2017, 03:57 PM | #12 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
The aluminum measurement is high, although I don't know whether it's accurate. There have been issues with ICP results. There's some reading on the subject, if you're interested. Aluminum might cause problems for corals, particularly certain soft corals, but I'd ignore the test results if the animals are doing well enough.
The strontium level is a bit low, but strontium generally is not very important in our tanks: http://www.advancedaquarist.com/issues/nov2003/chem.htm I dosed strontium for a while, but stopped because it didn't seem to have any effect. The other numbers seem fine as is.
__________________
Jonathan Bertoni |
10/05/2017, 04:35 PM | #13 |
Registered Member
Join Date: Nov 2009
Location: Evansville, IN
Posts: 1,864
|
Well, most of my SPS are growing nicely, but I do have a red monti cap that has never looked great in my tank (poor coloration and slow growth). My derasa's growth seems to have stalled as well.
|
10/05/2017, 06:31 PM | #14 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
I'd look at other issues first, but in theory the Marine Pure block could be irritating them. I doubt that's the case, though. How big are the derasa clams?
__________________
Jonathan Bertoni |
10/05/2017, 06:50 PM | #15 |
Registered Member
Join Date: Nov 2009
Location: Evansville, IN
Posts: 1,864
|
There's only one clam. It's about 10-12", and the tank is 125gal. I did recently discover my phosphate was bottomed out, so I started dosing with Neophos. It would consistently read 0.0 on my Hanna checker. I've been dosing for 3 weeks or so, and have seen some improvement, and I think the clam may be starting to grow again. The monti is still fairly washed out though.
Cal and alk get tested regularly, and are very consistent. I maintain my levels with 2-part on a doser. Magnesium hardly ever moves. Lighting is a 6-bulb ATI t5 with 6 month old bulbs 11hr a day. Temps are maintained by my apex at ~78. It's strange to me that I'd be struggling with a beginner SPS when I've got a few colonies of acropora and millipora that are probably 8" across and growing rapidly. |
10/05/2017, 07:55 PM | #16 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
The phosphate dosing makes sense with that large a clam in the tank. I think that a slower growth rate is normal, though, once the animal is that size.
I'm not sure why the Montipora is having trouble, but it could be unhappy with the lighting level or have some sort of disease or predator attacking it.
__________________
Jonathan Bertoni |
10/05/2017, 08:01 PM | #17 | |
Registered Member
Join Date: Nov 2009
Location: Evansville, IN
Posts: 1,864
|
Quote:
|
|
10/06/2017, 09:13 AM | #18 |
Registered Member
Join Date: Mar 2013
Location: Central NC
Posts: 5,062
|
What I'd suggest is to hold off dosing anything for a while. This is a personal opinion without any references to back it up, but those aluminum levels would concern me. Enough to remove the bio-block and do several 20% water changes over the course of a week or so. Presuming you're using a decent brand of salt, those water changes will likely bring your trace element values into acceptable range.
BTW - your nitrate values seem fairly elevated. While 20ppm isn't likely to harm any of the life in the tank, it might indicate an imbalance somewhere in your tank's microbiological communities. FWIW, I typically have to carbon dose a newly set-up tank (at a very low level of carbon dosing) for about a 4 week period. Once I do that, and nitrate/phosphate values come into balance, further carbon dosing seems to be unnecessary - nitrate remains below 5 ppm no matter how much I feed the fish or corals. This is also just me theorizing without any evidence to back it up, but it seems that the initial carbon dosing regimen is sufficient to establish an anaerobic nitrate-reducing bacterial bed, and that community continues to reduce nitrate to nitrogen without an additional easily-oxidizable carbon source. |
10/06/2017, 09:21 AM | #19 |
Registered Member
Join Date: Nov 2009
Location: Evansville, IN
Posts: 1,864
|
The tank is 2 years old. Despite my fairly light bioload, open aquascape, and large skimmer I've always had highish nitrates (though my Nyos kit always tells me I'm around 10ppm). I tried a turf scrubber for a while and didn't see results, I tried vodka dosing for a while, and never got below 5ppm. In retrospect, I think my tank is phosphate limited, which was preventing either method from fully pulling down my nitrates.
The Marine Pure block has been removed. I'll try to get in a large water change this weekend. |
10/06/2017, 03:52 PM | #20 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
10 ppm is fine, and I'd trust the kit over the ICP number, personally, although nitrate testing in general seems to be problematic. Kits tend to disagree on a regular basis.
I'd keep the water change in the 15-20% range and do more changes, if I wanted to drop the level quickly. Larger changes sometimes cause problems, so given that the tank is doing reasonably well, I'd be cautious.
__________________
Jonathan Bertoni |
10/06/2017, 05:00 PM | #21 |
Registered Member
Join Date: Nov 2009
Location: Evansville, IN
Posts: 1,864
|
Yeah, about 15% is the maximum I can do at any one time anyway. I have a 125gal tank, and I mix water in a Brute trash can, which I usually fill to around 22gal.
|
10/06/2017, 08:32 PM | #22 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
Okay, that should be fine.
__________________
Jonathan Bertoni |
10/08/2017, 02:28 PM | #23 |
Registered Member
Join Date: Nov 2009
Location: Evansville, IN
Posts: 1,864
|
I feel like the answer is no, but any idea if activated carbon removes aluminum? I can't find a straight answer on google.
|
10/08/2017, 07:31 PM | #24 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
It would remove aluminum or alumina that's bound to organics, but I don't know what percentage of the aluminum in a system would be bound that way. Activated carbon won't bind metallic aluminum or alumina, as far as I know.
__________________
Jonathan Bertoni |
10/09/2017, 06:52 AM | #25 |
Registered Member
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
|
A polyfilter should remove aluminum..
__________________
Who me? |
|
|