Reef Central Online Community

Go Back   Reef Central Online Community > General Interest Forums > New to the Hobby
Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Unread 01/08/2014, 06:12 PM   #1
Travish881
Registered Member
 
Travish881's Avatar
 
Join Date: Dec 2013
Location: Myrtle Beach
Posts: 117
Aquascape help

image.jpg
Tell me what you guys think it's a 36 gallon with about 45lbs in it is that to much


Travish881 is offline   Reply With Quote
Unread 01/08/2014, 06:15 PM   #2
Royal Clown
Registered Member.
 
Join Date: Dec 2013
Location: Michigan, USofA
Posts: 111
Wow that looks nice! Make sure it's not touching the glass anywhere and every rock is firmly standing and I think everything will look great.


Royal Clown is offline   Reply With Quote
Unread 01/08/2014, 06:20 PM   #3
Maxxumless
To the Max...
 
Maxxumless's Avatar
 
Join Date: Aug 2003
Posts: 2,364
Nice pieces you have there. I'd go get some two-part cement (example) and start toying around with different shapes. The way you have them now isn't very effective IMO. For more ideas I highly recommend this link...


Maxxumless is offline   Reply With Quote
Unread 01/08/2014, 06:28 PM   #4
Travish881
Registered Member
 
Travish881's Avatar
 
Join Date: Dec 2013
Location: Myrtle Beach
Posts: 117
Thanks for the feedback the packets for bio magnet clarifier that came in the Caribbean sand should we use that or no ?


Travish881 is offline   Reply With Quote
Unread 01/08/2014, 06:30 PM   #5
Maxxumless
To the Max...
 
Maxxumless's Avatar
 
Join Date: Aug 2003
Posts: 2,364
Meh, I do, but by the next day whether I use them or not, the aquarium's crystal clear when I use floss media & a sock.


Maxxumless is offline   Reply With Quote
Unread 01/08/2014, 06:31 PM   #6
Royal Clown
Registered Member.
 
Join Date: Dec 2013
Location: Michigan, USofA
Posts: 111
Quote:
Originally Posted by Travish881 View Post
Thanks for the feedback the packets for bio magnet clarifier that came in the Caribbean sand should we use that or no ?
Yea I did that but going back I would have just skipped it. The water will clear up on its own after the 1st day, no need to have all those extra chemicals in your water.


Royal Clown is offline   Reply With Quote
Unread 01/08/2014, 06:39 PM   #7
Travish881
Registered Member
 
Travish881's Avatar
 
Join Date: Dec 2013
Location: Myrtle Beach
Posts: 117
Alright thank you not going to use them. Should I run the marineland penguin bio wheel 200 as soon as water is in tank?


Travish881 is offline   Reply With Quote
Unread 01/08/2014, 06:48 PM   #8
Royal Clown
Registered Member.
 
Join Date: Dec 2013
Location: Michigan, USofA
Posts: 111
Quote:
Originally Posted by Travish881 View Post
Alright thank you not going to use them. Should I run the marineland penguin bio wheel 200 as soon as water is in tank?
I don't know about that filter system but if that's what is filtering your tank then yes it should be on 24/7 365.


Royal Clown is offline   Reply With Quote
Unread 01/08/2014, 06:57 PM   #9
Travish881
Registered Member
 
Travish881's Avatar
 
Join Date: Dec 2013
Location: Myrtle Beach
Posts: 117
Okay thank you very much


Travish881 is offline   Reply With Quote
Unread 01/08/2014, 07:06 PM   #10
Royal Clown
Registered Member.
 
Join Date: Dec 2013
Location: Michigan, USofA
Posts: 111
Quote:
Originally Posted by Travish881 View Post
Okay thank you very much
No problem! I'd also turn the lights on about 6-10hrs a day just to get the diatoms out and taken care of now, I don't think you'll need heater now since it's pretty warm in Myrtle Beach, enough to grow bacteria i'm sure.


Royal Clown is offline   Reply With Quote
Unread 01/08/2014, 07:15 PM   #11
Travish881
Registered Member
 
Travish881's Avatar
 
Join Date: Dec 2013
Location: Myrtle Beach
Posts: 117
Well right now it's about 25 degrees out brr lol but I have the heater on now it's set to 78 cause the saltwater we added was at about room temp


Travish881 is offline   Reply With Quote
Unread 01/08/2014, 07:16 PM   #12
Royal Clown
Registered Member.
 
Join Date: Dec 2013
Location: Michigan, USofA
Posts: 111
It gets cold down in myrtle beach? man you learn something new every day.


Royal Clown is offline   Reply With Quote
Unread 01/08/2014, 08:02 PM   #13
Travish881
Registered Member
 
Travish881's Avatar
 
Join Date: Dec 2013
Location: Myrtle Beach
Posts: 117
Yea I can't wait for the weather to warm up how long you guys think it would take a 36 gal to get up to temp ?


Travish881 is offline   Reply With Quote
Unread 01/08/2014, 08:34 PM   #14
Maxxumless
To the Max...
 
Maxxumless's Avatar
 
Join Date: Aug 2003
Posts: 2,364
Depends on the heater and the starting temp. As for the lights, I'd keep them off during cycling. Diatoms are going to come no matter what you do. If you used RO/DI water and do a 20-30% water change (again w/ RO/DI) after the cycle, you'll minimize any algae blooms. Toss the Bio-Wheel too - just run without it. The LR and sand should be enough, but if you want a boost to your biological filtration use SeaChem's Matrix in a small bag inside the filter. The Bio-Wheel is oxygen rich, which aerobic bacteria love, but your real shortage will be the kind of bacteria that doesn't like oxygen, where Matrix comes in.


Maxxumless is offline   Reply With Quote
Unread 01/08/2014, 09:02 PM   #15
Travish881
Registered Member
 
Travish881's Avatar
 
Join Date: Dec 2013
Location: Myrtle Beach
Posts: 117
So the bio wheel can and will cause a significant algae bloom ?


Travish881 is offline   Reply With Quote
Unread 01/08/2014, 09:22 PM   #16
Maxxumless
To the Max...
 
Maxxumless's Avatar
 
Join Date: Aug 2003
Posts: 2,364
It will hasten it, but will not cause it on it's own. The wheel is meant as a biological filtration method - and a good one at that. It houses air loving bacteria of the type that turns ammonia into less toxic waste like nitrite and that into even less toxic waste. The wheel is redundant and only promotes the initial bacteria types. The real shortage is with the final stages of waste export. And that includes, but is not limited to, macro algae, coral uptake (yep, they use waste products too), and non-oxygen loving bacteria (where Matrix comes in). This is also one of the main reasons we do water changes - to get rid of accumulating waste products.


Maxxumless is offline   Reply With Quote
Unread 01/08/2014, 09:25 PM   #17
biocube101
Registered Member
 
Join Date: Aug 2013
Posts: 65
I have roughly the same size tank and I still find myself rearranging my rock when I clean. I wish I would have taken the time to build a foam rock wall so I wouldnt be able to keep rearranging it.


biocube101 is offline   Reply With Quote
Unread 01/08/2014, 10:51 PM   #18
Travish881
Registered Member
 
Travish881's Avatar
 
Join Date: Dec 2013
Location: Myrtle Beach
Posts: 117
Quote:
Originally Posted by Maxxumless View Post
It will hasten it, but will not cause it on it's own. The wheel is meant as a biological filtration method - and a good one at that. It houses air loving bacteria of the type that turns ammonia into less toxic waste like nitrite and that into even less toxic waste. The wheel is redundant and only promotes the initial bacteria types. The real shortage is with the final stages of waste export. And that includes, but is not limited to, macro algae, coral uptake (yep, they use waste products too), and non-oxygen loving bacteria (where Matrix comes in). This is also one of the main reasons we do water changes - to get rid of accumulating waste products.
Would changing the wheel out periodically help ?


Travish881 is offline   Reply With Quote
Unread 01/08/2014, 10:53 PM   #19
Travish881
Registered Member
 
Travish881's Avatar
 
Join Date: Dec 2013
Location: Myrtle Beach
Posts: 117
Oh and guys my GF noticed on the LR that we just put into the tank today what looked to be as best I can describe like a set of branches hanging off the rock will try to provide a pic tomorrow but any idea what that could be?


Travish881 is offline   Reply With Quote
Unread 01/08/2014, 11:26 PM   #20
Maxxumless
To the Max...
 
Maxxumless's Avatar
 
Join Date: Aug 2003
Posts: 2,364
Changing it out, sure, but that would kinda defeat the purpose of having them in the the first place. They're biological filters and you do not require this type of biological filter. You need the kind that is porous and high surface area without ample aeration - eg live rock rubble or something like SeaChem's Matrix.

If it looks like branches of a tree, it may be a type of gorgonian (Google for images). The thing you should be looking, or rather listening for, is a sharp clicking sound


Maxxumless is offline   Reply With Quote
Unread 01/08/2014, 11:59 PM   #21
Travish881
Registered Member
 
Travish881's Avatar
 
Join Date: Dec 2013
Location: Myrtle Beach
Posts: 117
Yea I really don't want a mantis not that they're not cool and interesting just don't want to deal with getting him out, and yea it looked similar to the google images I saw just the one on my rock was brownish in color and small so idk. Are they good or bad to have ?



Last edited by Travish881; 01/09/2014 at 12:06 AM.
Travish881 is offline   Reply With Quote
Unread 01/09/2014, 12:30 AM   #22
Maxxumless
To the Max...
 
Maxxumless's Avatar
 
Join Date: Aug 2003
Posts: 2,364
If that's what it is, it will probably die, but that's the way LR goes. No danger.


Maxxumless is offline   Reply With Quote
Unread 01/09/2014, 03:11 PM   #23
Travish881
Registered Member
 
Travish881's Avatar
 
Join Date: Dec 2013
Location: Myrtle Beach
Posts: 117
So the tank has been up and running for about 1 full day now lots of sand covering the bottom pieces of rock what's the best way to go about getting that sand off and what should I be doing now in terms of my cycle ?


Travish881 is offline   Reply With Quote
Unread 01/09/2014, 07:39 PM   #24
Maxxumless
To the Max...
 
Maxxumless's Avatar
 
Join Date: Aug 2003
Posts: 2,364
It will settle on it's own, but I usually run floss in a filter and a filter sock (in sump) for a day or two. Usually crystal clear in 24-48 hours. If your rock is live, your cycle is already starting as things die off and are broken down by bacteria. You should start testing for ammonia in a day or two. It will go up and gradually go back down to zero. As it falls, start testing for nitrites. It will rise and eventually peak just like ammonia. When it, and ammonia, are at zero you're done and can start thinking about your first animal(s). You can speed things up a little with something like BIO-Spira or Fritz Zyme 9. With these products, you need to test every day due to the speed at which ammonia and nitrites will rise and fall (usually in a few days). The skimmer must be turned off for four days after adding bacteria.


Maxxumless is offline   Reply With Quote
Unread 01/09/2014, 07:44 PM   #25
Travish881
Registered Member
 
Travish881's Avatar
 
Join Date: Dec 2013
Location: Myrtle Beach
Posts: 117
Thanks I don't have a sump yet but got a ten gallon from petco to set one up. There's not a lot of room under the stand so it'll have to stay small. Also when can I start adding a cuc. Dying to get some snails and a shrimp. The rock is live so the natural die off will create the ammonia ? Got my API test kit so I'll start testing in a day or two.


Travish881 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -6. The time now is 07:07 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.