Reef Central Online Community

Go Back   Reef Central Online Community > Sponsor Forums > Neptune Systems
Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Unread 01/20/2018, 12:12 PM   #1
bobt2
Registered Member
 
Join Date: Jan 2005
Location: long island NY
Posts: 1,835
cor 15, running

so, 1st impressions. it replaced a mag 12 return pump, now, the exit of the 12 was 3/4 in into a 1" flow sensor. it was reading 325gph with the valves dialed down to what looked good. the cor starts out at 1 1/4 dialed down to the 1" flow sensor.i.m running about 70% of max. the flow shows 285gph, however, I had to open my down valve into the sump a little to match the output, so I,m not sure the flow sensor is accurate. running nice and quite and at way less power, therefore less heat than the mag. so far I like it.i also changed out my mag 3 into the fudge and carbon reactor with a skimz dc pump.


bobt2 is offline   Reply With Quote
Unread 01/21/2018, 10:34 AM   #2
bobt2
Registered Member
 
Join Date: Jan 2005
Location: long island NY
Posts: 1,835
24 hrs later, the tank is running about 2f cooler with the a. .c pumps gone from the sump. all that is left is the mag 9 feeding the skimmer. that's the next upgrade.


bobt2 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -6. The time now is 05:29 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.