|
02/22/2020, 01:09 PM | #1 |
Registered Member
Join Date: Oct 2003
Location: Hamilton,ON.Canada
Posts: 527
|
DIY ph probe fitting
Hi all I'm very close to drill
My calcium reactor to install a ph probe, But I threw out the old ph Probe. So practically I don't have a proper size Now I got Compression fittings That are 1/2" and 3/4" They both have nitrile sleeves but which one is the right size? https://flic.kr/p/2iwoyCD https://flic.kr/p/2iwnoPX
__________________
lets save the reef Current Tank Info: Hardware: 125g Reef,Mak4 for return,DIY 20G sump,DIY Beckett Skimmer(AF30) driven by a Mak4,DIY S.Denitrator,DIY Calcium reactor(PM), wavemaker .MJ mods on Swirlestein,Jebao WP 20,Lighting: 60 LEDs, moon lights Last edited by Isayso; 02/23/2020 at 07:52 AM. Reason: Mistake |
02/22/2020, 05:19 PM | #2 |
Registered Member
Join Date: Jun 2005
Location: Lincoln, NE
Posts: 318
|
Nominal size is 12mm diameter most of the pH probes used in the hobby. So, 1/2" is probably the right one.
__________________
Current build thread : http://www.reefcentral.com/forums/showthread.php?t=2547305 I ate a jellyfish... tasted like soy sauce. Current Tank Info: 180 gallon system in progress |
02/22/2020, 07:46 PM | #3 |
Registered Member
Join Date: Oct 2003
Location: Hamilton,ON.Canada
Posts: 527
|
Thank you,
Also I forgot to ask If the 1/2 is ok Once I hit the sleeve on Will It fit
__________________
lets save the reef Current Tank Info: Hardware: 125g Reef,Mak4 for return,DIY 20G sump,DIY Beckett Skimmer(AF30) driven by a Mak4,DIY S.Denitrator,DIY Calcium reactor(PM), wavemaker .MJ mods on Swirlestein,Jebao WP 20,Lighting: 60 LEDs, moon lights |
02/23/2020, 07:54 AM | #4 |
Registered Member
Join Date: Oct 2003
Location: Hamilton,ON.Canada
Posts: 527
|
I guess that I have to do a dry fit before I start drilling the calcium reactor
Thanks again
__________________
lets save the reef Current Tank Info: Hardware: 125g Reef,Mak4 for return,DIY 20G sump,DIY Beckett Skimmer(AF30) driven by a Mak4,DIY S.Denitrator,DIY Calcium reactor(PM), wavemaker .MJ mods on Swirlestein,Jebao WP 20,Lighting: 60 LEDs, moon lights |
Thread Tools | |
|
|