|
12/28/2018, 07:14 PM | #1 |
Registered Member
Join Date: Oct 2017
Posts: 14
|
reef roids, reef frenzy causing KH-Calcium spike?
I have never taken a lot of test on my KH, CA, or MG levels because my reef tank has always seemed to be doing pretty well. I noticed a few things not doing great about a month ago and started testing to see what was going on. I was surprised to find all of those levels really high (almost off the charts) since I have never added supplements, I thought for sure the problem would be that my levels were low. Currently my KH is 13.7, CA 480, MG 1440. I tested my tap and that was not the issue, I use coral pro salt which seems to be pretty good. I have also bought 2 different test kits and have gotten very similar results. I am wondering if my issue is the food and supplements that I have been using which are reef roids and reef frenzy? Is anyone familiar with these and if they add Calc and MG? I am also wondering how I can start to bring down these levels without shocking my tank, thanks
|
12/28/2018, 08:44 PM | #2 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
Food products shouldn't add to the calcium, magnesium or alkalinity levels. I'd look elsewhere for the source of the problem. It's possible in theory to load food with those supplements, but I've never heard of such a report for those products.
__________________
Jonathan Bertoni |
12/28/2018, 09:58 PM | #3 |
Recovering Detritophobe
Join Date: Jan 2004
Location: Cary, NC
Posts: 7,443
|
With elevated numbers like that your salinity may be high. I would check salinity (how are you testing?) and confirm calibration of whatever you’re using to check salinity.
Sent from my iPhone using Tapatalk
__________________
If it's worth doing, it's worth doing right. I remember when zoanthids were called things like "green" and "orange" and not "reverse gorilla nipple." Current Tank Info: 180g reef with all the bells and whistles |
12/29/2018, 01:04 PM | #4 | |
Registered Member
Join Date: Oct 2017
Posts: 14
|
Quote:
|
|
12/29/2018, 03:21 PM | #5 |
Registered Member
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
|
What salt are you using, and have you tested a new batch?
__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256 Originally posted by der_wille_zur_macht: "He's just taking his lunch to work" |
12/29/2018, 04:49 PM | #6 |
Registered Member
Join Date: Nov 2009
Location: Reseda, Ca.
Posts: 1,717
|
If you are using tap water it is adding alkalinity for sure, maybe calcium and magnesium too !! (plus possibly other unwanted nasty stuff) salt mixes are designed to be mixed with ro/di water
__________________
Please don't feed the bears because the bears will become dependent on free handouts and forget how to take care of themselves …... Current Tank Info: 75 Gal. Mixed reef mostly sps |
12/29/2018, 05:27 PM | #7 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
Most tap water will have some alkalinity and calcium in it, but the level can be very low. The alkalinity level should be measurable with reasonable precision with a standard alkalinity kit, so its effect can be computed fairly easily.
__________________
Jonathan Bertoni |
12/29/2018, 08:57 PM | #8 |
Crab Free Zone
Join Date: Sep 2017
Location: Ontario, Canada
Posts: 2,906
|
Red Sea pro mixes high in the ranges, add some hobby grade testing flux, and your numbers seem closer, I use RR and it does not increasing anything, other than maybe nitrate..
If you want lower numbers try IO or RC which mix a but lower in the range. As far as testing goes, once I brought all 8 parameters into range and kept them there consistently with little daily flux, coral Health and grow became much faster, for me, relentless testing proved great results. |
12/30/2018, 02:34 PM | #9 |
Registered Member
Join Date: Oct 2017
Posts: 14
|
My tap has Calc of 40 and KH of 3.4. My Salt has calc 450 and KH 11.5. Could that be my issue? It sounds like a salt mix with lower nutrients might be the way to go
|
12/30/2018, 03:49 PM | #10 |
Registered Member
Join Date: Nov 2009
Location: Reseda, Ca.
Posts: 1,717
|
The way to go is to use Ro/Di water not tap water......who knows what unwanted elements are in your tap water (copper, zinc, tin...God knows what else)…...get yourself an ro/di unit ….
__________________
Please don't feed the bears because the bears will become dependent on free handouts and forget how to take care of themselves …... Current Tank Info: 75 Gal. Mixed reef mostly sps |
12/30/2018, 04:08 PM | #11 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
So I'd expect the fresh saltwater to be at 500 ppm calcium, and about 15 dKH. The dKh is a bit high, but it might be safe enough.
__________________
Jonathan Bertoni |
|
|