|
05/04/2012, 08:23 PM | #1 |
Registered Member
Join Date: Dec 2011
Location: Wisconsin
Posts: 1,218
|
Mp40 wet side "rattling"
I got some mp40s from a member here that are about 6-8 months used. One is great, but the other keeps rattling. If I adjust it in tank it goes away a few seconds but then comes back. I can get it to be normal for a few hours but inevitably the rattle comes back. If I turn the pump up or down it still rattles and gets faster or slower with the speed. I'm thinking of taking the wet side apart but am looking for tips on what I should look for? I've never taken a wet side apart.
|
05/04/2012, 08:25 PM | #2 |
Fish R Cool M'Kay
Join Date: Mar 2012
Posts: 223
|
Are the wet and dry side aligned perfectly? Did you mount the cord correctly so the dry side is not sliding out of alignment?
Sent from my iPhone using Tapatalk |
05/04/2012, 09:09 PM | #3 | |
Registered Member
Join Date: Dec 2011
Location: Wisconsin
Posts: 1,218
|
Quote:
But you just gave me an idea. I'm going to swap wet sides and see if the problem follows the wet side. If nof then I know it has to be some kind of alignment or dry side movement issue. |
|
05/07/2012, 12:15 PM | #4 |
Registered Member
Join Date: Dec 2011
Location: Wisconsin
Posts: 1,218
|
So the rattling followed the wet side when i swapped them, so it's definitely something with this wet side assembly.
|
05/07/2012, 12:50 PM | #5 |
Registered Member
Join Date: Mar 2011
Location: brooklyn NY
Posts: 529
|
try taking it apart and giving it a good cleaning in some vinegar. maybe something came loose or isnt sitting right within the assembly.
|
05/07/2012, 04:54 PM | #6 |
Registered Member
Join Date: Feb 2006
Location: Palatine, IL
Posts: 2,652
|
I had one that did this. $20 dollar maintenance kit fixed it.
|
Thread Tools | |
|
|