|
10/19/2017, 12:36 PM | #1 |
Registered Member
Join Date: Nov 2016
Posts: 3
|
Antisync intensity
I'm having trouble understanding how this works... Let's imagine the following scenario:
2 MP40s, A is on the left side of the tank, B is on the right side. A is set to ReefCrest at 30% (intensity varies from 10-30% or so) B is set to AntiSync with A at 100% intensity Does this mean that B will run also at 30% max, but the opposite bit of the 30% from A (i.e. when A is at 10%, B will be at 20%), or does it mean that it will run anywhere from 70-90%? Is B actually pulling water while A is pushing, and vice versa? |
|
|