|
02/17/2019, 11:08 PM | #1 |
Registered Member
Join Date: Jun 2003
Location: No Thomas
Posts: 481
|
Old 6000/6100 replacement parts
Does anyone carry the front bushing or propellers for the 6000/6100 from way back when? I still have 6 going strong, but rattling at low speeds.
|
02/18/2019, 10:43 AM | #2 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
You can still get many of the parts, but not the complete assembly, bushings, etc remain available.
https://www.tunze.com/US/en/product-...id%5D=3000.620
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
02/19/2019, 10:58 AM | #3 |
Registered Member
Join Date: Jun 2003
Location: No Thomas
Posts: 481
|
Thank you!
|
03/04/2019, 02:21 AM | #4 |
Registered Member
Join Date: Jun 2003
Location: No Thomas
Posts: 481
|
what parts do i need to settle the rattle? I think its the upper bushing that will solve the issue?
Thank you. |
03/04/2019, 03:31 PM | #5 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
Any chance of a picture of the condition of the parts you have? I can probably spot the problem in the photo. Usually it is brake shoes, bushing, or drive magnet that are worn.
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
03/08/2019, 08:35 PM | #6 |
Registered Member
Join Date: Jun 2003
Location: No Thomas
Posts: 481
|
|
03/11/2019, 08:34 AM | #7 |
RC Sponsor
Join Date: Apr 2000
Location: Austin Texas USA
Posts: 35,785
|
Yes, you definitely need new blades unless this is actually a 6080 pump, the blades are cut at the ends which would be a 6080 or 6060 but also could be due to impact, this will reduce the flow and cause vibration. I went through the factories inventory and they have some 7200.600 drive units left, these were the same as 6100.600 except the shaft, they have the shafts 6080.640 in stock so in theory we can make one and the blades are still in stock. I would either change it all with these parts or change the prop and bearing and upper bearing, the red ring under the upper bearing is not in the picture, I assume you have it? Do the brake shoes stay in and retract properly?
__________________
Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish |
|
|