|
11/07/2017, 10:12 PM | #1 |
Registered Member
Join Date: Sep 2017
Posts: 138
|
MP40 Antisynch Gyre, no change in speed
I have two MP10s and one MP40. I wanted to place the MP40 toward the front on one end, and the MP10s on the other end, front and rear. I wanted to run them in gyre mode, the MP40 and rear MP10 set to antisynch with the front MP10. I wanted the MP10 to be master because I can set it to 100% and the MP40 to 30 or 40%, whereas if the MP40 is master at 40%, the MP10s don't exceed 40%.
The problem is that there is no variance in the speed of the MP40. Even though the speed indicator is going up and down, the speed is constant. I programmed them using ESL. Suggestions? Also, one of the MP10s which I bought in April this year (the other I bought in October of this year) is noisy. Sounds similar to an RC car but not as loud. I can hear it upstairs. I can't hear the other two unless I put my ear next to them. Thanks |
Thread Tools | |
|
|