|
02/07/2018, 01:47 PM | #1 |
Registered Member
Join Date: Mar 2006
Location: Plano, TX
Posts: 2,517
|
Ozone with BK SM 200?
Is the BK SM 200 Ozone proof? I noticed the manual references the ozone connection on the pump intake.
Any additional precautions to consider on top of just hooking an ozone generator to it (assuming it is ozone safe)?
__________________
450g Mixed SPS/LPS Reef (MH/T5/VHO) |
02/07/2018, 02:09 PM | #2 |
Registered Member
Join Date: Sep 2003
Location: San Jose, CA
Posts: 6,499
|
I would add louts of carbon on the output and a bag of it over top of waste lid.
Sent from my iPhone using Tapatalk Pro |
02/07/2018, 02:23 PM | #3 |
RC Sponsor
Join Date: Sep 2009
Posts: 14,173
|
The Bubble Kings are all ozone ready. As with any skimmer that is ozone safe, you still need to filter the vents on the skimmer lid through carbon so that excess ozone is filtered out of the air leaving the lid. Some have added bags of carbon to the lid or even used an acrylic ring ontop of the lid with some screen and carbon set on top. I also suggest having the skimmers effluent exhaust through carbon. This can get tricky as you don't want to restrict the flow coming out of the skimmer.
Personally I much prefer using an ozone reactor as you have better control over the contact time the ozone has with the water because you can control the waters flow through the reactor. You also eliminate residual ozone issues because you would run the ozone reactors effluent through a carbon reactor. The overall result of using an ozone reactor is in my experience much better in terms of the impact it has on ORP and the speed of which the impact is experienced.
__________________
Director Customer Support Royal Exclusiv USA For All Royal Exclusiv & Bubble King questions please refer to our Sponsor forum: http://www.reefcentral.com/forums/fo...play.php?f=745 Current Tank Info: 480G display mixed reef, 90G sump, 90G refugium, 60G display refugium. Check out my build thread: http://www.reefcentral.com/forums/showthread.php?t=1783476 |
11/16/2018, 02:13 PM | #4 |
Premium Member
Join Date: Sep 2006
Location: Saskatoon
Posts: 1,350
|
Wouldn't it be a good idea for RE to sell this setup?
__________________
72x36x24 w/ Starfire viewing panes | 2x 40g sump | Profilux 3.1ex N | 3x Mitras 6100HV & T5 | RE DC250 + RD3 | 2x Abyzz A200 | 4x VorTech MP40 | RK2 300MG Ozone | Avast Marine Rx | |
|
|