Reef Central Online Community

Go Back   Reef Central Online Community > General Interest Forums > Tank Journals & Builds
Blogs FAQ Calendar Mark Forums Read

Notices

User Tag List

Reply
Thread Tools
Unread 03/02/2018, 10:41 AM   #1
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
Trashed 29 Gal./10 Gal. to Mini Reef & Sump

I’ve been wanting to set up a Mini reef tank for over a year now. I couldn’t decide on what size tank, rimless or not, AIO or sump, equipment, etc. Eventually I got analysis paralysis and did nothing, not to mention the price was more than I had anticipated. Then I came across this 29 & 10 gallon that needs some tlc and decided this will be my mini-reef project.

The stand is a little unstable and really dirty. The 29 is heavily water stained, has a chip in the top left corner along with cracked top trim. The 10 gallon is in pretty good shape.

The game plan is to refinish the stand (paint or stain will depend on how it looks after sanding) and add a few corner braces. The 29 gallon will need an overhaul. First is to clean it up and fill the chip (maybe cover it with some vinyl trim or something) to make it presentable. Next, I’m going reseal the tank and try and go rimless by removing the cracked trim and add some glass bracing. If it’s still in one piece at this point, I’ll push my luck and try my first attempt at drilling a tank (with the 10 gallon being used as the sump).

I’ve seen a few builds similar to this and they came out great and I hope this project can come out as nice. I’ll also try and keep track of what the project is costing since I’m on a budget of around $500 excluding livestock.

0228181340 resized



Last edited by PyroSteve; 03/04/2018 at 08:27 AM.
PyroSteve is offline   Reply With Quote
Unread 03/02/2018, 09:59 PM   #2
Slowhandhatcher
Registered Member
 
Join Date: Mar 2017
Posts: 1
a few ideas, t5ho light or black box leds the ones with wifi app by evergrow are nice i use three on my 220 and jebao power heads with wave maker super affordable and super powerful. i used to use eshopps overflows on my 55, but if its not tempered glass drill an overflow its so much better if you don't have to worry about losing siphon.


Slowhandhatcher is offline   Reply With Quote
Unread 03/03/2018, 11:35 PM   #3
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
Quote:
Originally Posted by Slowhandhatcher View Post
a few ideas, t5ho light or black box leds the ones with wifi app by evergrow are nice i use three on my 220 and jebao power heads with wave maker super affordable and super powerful. i used to use eshopps overflows on my 55, but if its not tempered glass drill an overflow its so much better if you don't have to worry about losing siphon.
Thanks for the ideas. A Black Box Led & Jebao pump are on the radar. Definitely drilling the tank. I'm using DIY PVC overflows on FW tanks in the basement but I'm always concerned about a flood. Plus, I want to try it to see how hard/easy it is. If it goes well, I'm going to do it to the others too. Same reason I'm trying resealing this also. I've got a 55 that needs a reseal bad. This is my test subject. Otherwise I would've just bought a 29 when they're a buck a gallon.


PyroSteve is offline   Reply With Quote
Unread 03/03/2018, 11:48 PM   #4
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
Cleaned the tank with Bar Keepers Friend to get most of the hard water stains out. Removed the broken top trim and started removal of the old silicone. The tank still has the manufacturer sticker - All-Glass 1989 - A 29 year old 29 Gallon! It definitely needs a reseal!

0302181200b resized

Glass is etched a bit but hoping it will disappear with some water. All ready for the new silicone. Just waiting on the delivery. Should be here Monday

0304180013 resized


PyroSteve is offline   Reply With Quote
Unread 03/04/2018, 04:42 PM   #5
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
On to the stand. Upon further review, I decided that to paint the stand. It’s had a rough life. Too many dents, dings scratches and chunks missing to go nuts with the refinish. Quick sand with 120 and 2 coats of black oil-based will have to do.

0304181533 resized


PyroSteve is offline   Reply With Quote
Unread 03/04/2018, 06:47 PM   #6
CRJ
Registered Member
 
CRJ's Avatar
 
Join Date: Aug 2012
Location: Ontario Canada
Posts: 304
Interesting. I will be interested to see how everything goes. For the cost of a tank, I personally would buy new, but I understand that isn't in everyones budget. Keep the updates rolling!


CRJ is offline   Reply With Quote
Unread 03/07/2018, 07:39 PM   #7
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
Quote:
Originally Posted by CRJ View Post
Interesting. I will be interested to see how everything goes. For the cost of a tank, I personally would buy new, but I understand that isn't in everyones budget. Keep the updates rolling!
Yeah 29 gallons are cheap enough and I could end up getting one if this goes south and leaks or breaks when drilling but my goal is to get the rimless look (like those nice Deep Blue tanks) with nothing hanging on the back. Today I did the reseal in black.

0307181344 resized

0307181506a resized

All cleaned up and touched up. Looks a whole lot better than when I brought it home last week! Hope to water test this weekend.

0307181816b resized


PyroSteve is offline   Reply With Quote
Unread 03/08/2018, 04:50 PM   #8
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
So I have some down time while the silicone cures. Trying to rockscape and everything looks like just a pile of rocks. I came up with this...

0307181341a resized

The tanks is high so I built it up. Does this not look natural? Opinions?

Also it has algea from my FW tank it was in. What would be best to get rid of it, vinegar or bleach bath?


PyroSteve is offline   Reply With Quote
Unread 03/10/2018, 07:45 PM   #9
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
After doing some searches it seems that the consensus is a 29 Gallon is too tall to convert to rimless without some bracing. I came across one thread where someone had a corner seam give out. Not good. So instead of just some small triangle on the corners I used this busted glass lid to add some support.

0304181551 resized

Not the same effect of full rimless but I can live with it.

0310181818 resized

Pretty much finished with the tank and stand. The cleaning, resealing, paint, and misc supplies cost about $40 (I even splurged on new hardware for the stand! ).

0310181819 resized

Next up the plumbing


PyroSteve is offline   Reply With Quote
Unread 03/12/2018, 07:27 PM   #10
vlangel
Registered Member
 
vlangel's Avatar
 
Join Date: Aug 2010
Posts: 2,409
That is looking real nice! Keep up the good work. Personally I think there is satisfaction in reclaiming something that needs some TLC. Good luck with drilling it.


vlangel is offline   Reply With Quote
Unread 03/13/2018, 10:24 PM   #11
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
Thanks! I can't let anything get thrown out! It's a sickness really. It's has been a fun build so far. I do have a concern about one of the tank seams which I posted in the another section of the forum. I'm hoping it's not a problem and don't have to trash the tank. For now I'll keep moving forward.

I did a water test and no leaks! It looks like the braces are good. There is a slight bow of about 1/16" which I have read is not unusual for 30-36" tank. I may add another center brace just in case.

0311181644 HDR resized 1

I didn't get the hole saw or bulkheads yet but started to mock up the plumbing. I had some fittings and pipe and, after a quick run to lowes, was able to finish up what I wanted to do. 1-1" overflow, 1-1" emergency overflow, 3/4" to 1/2" manifold with 3 ports and dual 3/4" returns.


cha-ching another $20

0309181411 resized
0313182329a resized



Last edited by PyroSteve; 03/13/2018 at 10:31 PM.
PyroSteve is offline   Reply With Quote
Unread 03/14/2018, 04:21 AM   #12
homer1475
Registered Member
 
homer1475's Avatar
 
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
Just a suggestion, but if your going to drill the tank for the overflow, why not also drill it for the returns?

IMO and it's purely and IMO, I hate the way over the top returns look on a rimless tank, specially when the overflows are drilled in.

Looking good otherwise. Love that you repurposed the tank and stand instead of just going out and buying new. Elbow grease is a lost concept these days.


__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256

Originally posted by der_wille_zur_macht:

"He's just taking his lunch to work"
homer1475 is offline   Reply With Quote
Unread 03/14/2018, 09:37 PM   #13
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
I've been going back and forth with the returns. I don't like that look either but I was thinking it would be easier if I needed to disassemble it. I could just lift the entire return off from the top. I did just order a 1 1/2 hole saw and the 3/4" bulkheads tho

I was going to buy a skimmer but I found this thing in my tub O' aquarium junk. We had a love/hate relationship way back. It'll probably work as good as anything else for this size.

0311181604 resized


PyroSteve is offline   Reply With Quote
Unread 04/11/2018, 08:54 PM   #14
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
Finally got some time to work on my budget reef build. Most of the equipment has arrived and I was able to drill the tank and mock up the final plumbing and return pump. Confidence was not high when I broke a couple pieces of scrap glass drilling first to make a template but I just needed to get the feel for it. I was just drilling too fast. I bought the cheap (surprise!!) hole saws from amazon and they were slightly off balance so I had to drill tediously slow, but eventually SUCCESS!!

0406181722 resized
Bulkheads, hole saws, elbows, strainer (plus overflow box) - $70

0407181619 resized

Now I just have to tear it all apart and build my black box LED light mount.....


PyroSteve is offline   Reply With Quote
Unread 04/12/2018, 09:44 PM   #15
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
Mounting the black box LED to the ceiling was not an option nor was drilling into the wall, so my only option was to mount it to the stand. I was looking at the 80/20.com materials but I couldn’t justify spending more on a piece of square tube aluminum, a couple of brackets and shipping, than the cost of the LED light itself. So I went off to the big box hardware stores and came back with this...

0409181549a resized

2”x2” x 72” aluminum fence end post (black powder coated) from Lowes, 2” & 3” black corner braces, some large washers and a bag of screws & nuts from Home Depot. I used a hacksaw and cut two pieces and drilled some holes for the screws to connect to the LED.

0409181550 resized

I didn’t want to drill holes in the LED anywhere they could be seen so I mounted it to the side and used the screws, large washers (3/16” x 1 1/4”), nuts and the 3” brackets.

0409182143 resized

The nice thing about the end fence post is it has holes on one side to run the wire to hide it.


0409182143a resized

And the finished product!

0410182227 HDR resized

It’s starting to look like a reef tank....

0410182232a HDR resized

Evergrow LED Black Box and DIY mount - $135



Last edited by PyroSteve; 04/12/2018 at 09:53 PM.
PyroSteve is offline   Reply With Quote
Unread 04/18/2018, 06:30 AM   #16
rum_pride
Registered Member
 
Join Date: Mar 2008
Location: Okinawa Japan
Posts: 145
Awesome build. Everything is looking really nice. I’ll definitely be following along


rum_pride is offline   Reply With Quote
Unread 04/23/2018, 09:39 PM   #17
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
Thanks RP! It’s taking longer than I thought. I got to put the sump together this weekend. I got tried of messing with the Sea Clone and MP1200 and ordered the K2-50 skimmer from Premium Aquatics. Great service from them BTW. I heard good things about this skimmer and it has the perfect footprint for a 10g. I also had a Phosban 150 Media Reactor to add to it....

0421182007 resized

The 10 gallon is REALLY small for 3 section sump. I wanted a refugium and ordered a nice pre-made 10 gallon kit but water level was 6” and the K2-50’s sweet spot is between 7-8.5” water height. So now I had to do what I didn’t want to do, and modify the kit....

0422181626a resized

Chambers set-up refuge-skimmer-return....9”-8”-7” right to left...

0422181625 resized

So here’s the completed sump including a DSC4000 return pump. It’s a tight fit!

0423182247 resized 1

with return pump, skimmer, reactor, Acrylic baffles with 4” sock kit (not in pic) = $275 Already over budget @ $535 and still need a heater, wavemaker & ATO (plus another purchase is on the way!) but having fun and learning so it’s all good.

One of the things I’ve learned is building a small tank is just as much work as a big tank!


PyroSteve is offline   Reply With Quote
Unread 04/24/2018, 01:58 AM   #18
homer1475
Registered Member
 
homer1475's Avatar
 
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
Wow that is tight. I have a waveline DC Pump and I know it's roughly the same size(about like a soda can).

One thing I see might become an issue. With the skimmer in the section next to the return, you might end up with quite a few bubbles spilling over and getting sucked up in the pump. It will either cause cavitation in the pump(ruining the pump), or quite a few bubbles in the DT.

Why not the first section?


__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256

Originally posted by der_wille_zur_macht:

"He's just taking his lunch to work"
homer1475 is offline   Reply With Quote
Unread 04/24/2018, 02:00 AM   #19
homer1475
Registered Member
 
homer1475's Avatar
 
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
Also if those baffles are acrylic or plastic? Hopefully you left about a 1/4" gap between the baffle and glass? Acrylic swells when wet, and if the baffles are tight to the glass, it will crack the glass.


__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256

Originally posted by der_wille_zur_macht:

"He's just taking his lunch to work"
homer1475 is offline   Reply With Quote
Unread 04/24/2018, 05:53 AM   #20
rum_pride
Registered Member
 
Join Date: Mar 2008
Location: Okinawa Japan
Posts: 145
This is an awesome build thread. I’m definitely a fan of refurbishing an old tank. Everything is looking really good. Best of luck with the rest of the project. I’ll definitely be tagging along to watch your progress.


Sent from my iPhone using Tapatalk


rum_pride is offline   Reply With Quote
Unread 04/24/2018, 07:45 AM   #21
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
Quote:
Originally Posted by homer1475 View Post
Also if those baffles are acrylic or plastic? Hopefully you left about a 1/4" gap between the baffle and glass? Acrylic swells when wet, and if the baffles are tight to the glass, it will crack the glass.
Hmm... I didn't know that. There are quite a few people selling these acrylic sumps kits (OceanBox Designs, Modular Marine, Jax Racks etc.) pre-cut for Aqueon glass aquariums. These were snug and no way 1/4" gap. In fact they said if making a custom set, they would need to know the aquarium I.D. within a 1/32"? I did google them and couldn't find any issues on any of the reef forums. I know they have sold hundreds of them so you figure word would get out right? The biggest problem for acrylic baffles I read was to make sure they're at least 1/4" so not to bow and use the correct sealant for plastics (which I did). I guess I have to decide if I want to use this or rebuild it with glass.


PyroSteve is offline   Reply With Quote
Unread 04/24/2018, 07:53 AM   #22
homer1475
Registered Member
 
homer1475's Avatar
 
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
Plenty of thread about acrylic baffles breaking glass sumps, just do an RC search.


__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256

Originally posted by der_wille_zur_macht:

"He's just taking his lunch to work"
homer1475 is offline   Reply With Quote
Unread 04/24/2018, 11:49 AM   #23
PyroSteve
Registered Member
 
Join Date: Jan 2017
Location: Springfield, PA
Posts: 60
I see what you mean. Thanks for the heads up. I'm going to email the manufacturer and get their thoughts. I'm hoping they know the tolerances of their products. I have another 10 gallon so a redo might be worth doing.


PyroSteve is offline   Reply With Quote
Unread 04/24/2018, 12:21 PM   #24
homer1475
Registered Member
 
homer1475's Avatar
 
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313


Just glad I could save you the headache of a broken sump. As long as there is space between the glass and acrylic, it should be fine. If not you know what will happen.

Emailing the manufacturer for their tolerances would be a good plan.


__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256

Originally posted by der_wille_zur_macht:

"He's just taking his lunch to work"
homer1475 is offline   Reply With Quote
Unread 04/24/2018, 12:23 PM   #25
homer1475
Registered Member
 
homer1475's Avatar
 
Join Date: Mar 2015
Location: Upstate NY
Posts: 5,313
Lately I seem to be the bearer of bad news in build threads......


__________________
80G SCA Build: http://reefcentral.com/forums/showthread.php?t=2560256

Originally posted by der_wille_zur_macht:

"He's just taking his lunch to work"
homer1475 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On



All times are GMT -6. The time now is 03:32 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Powered by Searchlight © 2024 Axivo Inc.
Use of this web site is subject to the terms and conditions described in the user agreement.
Reef CentralTM Reef Central, LLC. Copyright ©1999-2022
User Alert System provided by Advanced User Tagging v3.3.0 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.