|
05/10/2017, 06:43 AM | #1 |
Registered Member
Join Date: Apr 2003
Location: Sacramento, CA
Posts: 683
|
Connect SA Doser 2 to Profilux 3
I connect the Doser SA 2 to Profilux via PAB port. I am able to see it on GCC/system/PAB list. When I assign it and confirm to save it in profilux, it doesn't stay selected. Has anyone done this? Thanks.
__________________
Mixed reef and fishes Equipments: ELOS 120XL GHL: Mitras 6200HV x 2/Doser2/Profilux/Profilux Touch/Aquabreeze Genesis: Auto Water Change |
05/10/2017, 07:13 AM | #2 |
Registered Member
Join Date: Jul 2015
Posts: 236
|
A few things to check:
- Make sure the SA doser is set to SLAVE mode before assigning to the ProfiLux. - Make sure the SA doser is on the most current FW version, currently v1.24 - Same as above, but for the P3 also, currently v6.29. |
05/10/2017, 07:29 PM | #3 |
Registered Member
Join Date: Apr 2003
Location: Sacramento, CA
Posts: 683
|
How do I set the SA doser to slave mode?
__________________
Mixed reef and fishes Equipments: ELOS 120XL GHL: Mitras 6200HV x 2/Doser2/Profilux/Profilux Touch/Aquabreeze Genesis: Auto Water Change |
05/11/2017, 07:22 AM | #4 |
Registered Member
Join Date: Jul 2015
Posts: 236
|
Connect to the Doser 2 SA via USB.
Once you are connected, set the Operation mode to SLAVE and click SAVE CHANGES. |
05/31/2017, 10:58 AM | #5 |
Registered Member
Join Date: Apr 2003
Location: Sacramento, CA
Posts: 683
|
got it working after updating the FW on the Doser and Profilux.
__________________
Mixed reef and fishes Equipments: ELOS 120XL GHL: Mitras 6200HV x 2/Doser2/Profilux/Profilux Touch/Aquabreeze Genesis: Auto Water Change |
Thread Tools | |
|
|