|
01/23/2019, 11:28 AM | #1 |
Registered Member
Join Date: Jun 2008
Location: NPR, Florida
Posts: 378
|
LED stuck on
I have 3 Ethereals over my tank. They are all linked together on the same schedule and operate correctly. When the lights go out though, one led on one unit stays on bright white. Ive tried resetting it, no go. As long as it is plugged in this happens, even if I set the apex to turn off the outlet that it's plugged into. Anyone ever deal with this on any light setup. It's $140 to repair from maxspect
Sent from my SM-G955U using Tapatalk |
01/23/2019, 11:54 AM | #2 |
Registered Member
Join Date: Apr 2008
Location: North Palm Beach, FL
Posts: 2,270
|
I've had this happen on a different LED setup, and it was an issue with the driver board being shorted to power on the control circuit.
Most likely the same type of issue. you could open the fixture up and have a look, but may not find any obvious problem
__________________
120g, 50g Sump, SRO XP2000i, MP40W x2, DIY Hybrid LED/T5 Fixture, Apex PBMAS VP 2010-11 PBMAS 2017 President |
|
|