Free Reef Equipment

Edward Smith · 02/28/2016, 03:40 PM

Hello All,
Free equipment available for pickup in St Charles (https://www.google.com/maps/place/41%C2%B055'15.9%22N+88%C2%B024'16.8%22W/@41.9210814,-88.4221763,14z/data=!3m1!4b1!4m2!3m1!1s0x0:0x0). Will not hold or ship, first come, first serve, unless I know you. If not gone by next Sunday evening (03/06), it’s heading for the trash.

Fastest response: 1edsm4@gmail.com

Happy Reefing!

Red Sea Ozone Air Dryers: One 250g and one 500g
Jalli PC 36w electronic ballast, weathered (old) reflector, and four pin socket.
Dual Electronic Metal Halide Ballast (ONLY ONE WORKING!). If you are a DIY guy/gal, you can probably get the other side working as well or replace the component.
Six T12 endcaps connected to wiring harness that is attachable to Coralvue 660 ballast (ballast not included).
Three standard metal halide parabolic reflectors with mogul sockets. Worn and pitted but will still work fairly well. Mogul sockets will need to be reattached to reflectors.
Two small dolphin airpumps
Jalli Heater Controller (JT1000)
Two DE metal halide sockets: one 150w/70w and one 250w
Pretty beat up but working and accurate salinity refractometer

Edward Smith · 03/05/2016, 02:55 PM

Free three stage RO housing (housing only, no membrane or filters). Perfect for DIY setup. Just order membrane and filters. Three stages = prefilter, RO housing and postfilter.

higgs83 · 03/07/2016, 09:25 PM

That housing would make for a nice starting point towards a RODI! Good stuff.

02/28/2016, 03:40 PM	#1
Edward Smith Registered Member Join Date: Apr 2005 Location: Saint Charles, IL Posts: 3,071	Free Reef Equipment Hello All, Free equipment available for pickup in St Charles (https://www.google.com/maps/place/41%C2%B055'15.9%22N+88%C2%B024'16.8%22W/@41.9210814,-88.4221763,14z/data=!3m1!4b1!4m2!3m1!1s0x0:0x0). Will not hold or ship, first come, first serve, unless I know you. If not gone by next Sunday evening (03/06), it’s heading for the trash. Fastest response: 1edsm4@gmail.com Happy Reefing! Red Sea Ozone Air Dryers: One 250g and one 500g Jalli PC 36w electronic ballast, weathered (old) reflector, and four pin socket. Dual Electronic Metal Halide Ballast (ONLY ONE WORKING!). If you are a DIY guy/gal, you can probably get the other side working as well or replace the component. Six T12 endcaps connected to wiring harness that is attachable to Coralvue 660 ballast (ballast not included). Three standard metal halide parabolic reflectors with mogul sockets. Worn and pitted but will still work fairly well. Mogul sockets will need to be reattached to reflectors. Two small dolphin airpumps Jalli Heater Controller (JT1000) Two DE metal halide sockets: one 150w/70w and one 250w Pretty beat up but working and accurate salinity refractometer __________________ "Hi, my name is Ed and I'm a reefaholic" "Hi Ed" Current Tank Info: 24g Zeroedge (rules), 150g (to be unveiled soon)

03/05/2016, 02:55 PM	#2
Edward Smith Registered Member Join Date: Apr 2005 Location: Saint Charles, IL Posts: 3,071	Free three stage RO housing (housing only, no membrane or filters). Perfect for DIY setup. Just order membrane and filters. Three stages = prefilter, RO housing and postfilter. __________________ "Hi, my name is Ed and I'm a reefaholic" "Hi Ed" Current Tank Info: 24g Zeroedge (rules), 150g (to be unveiled soon)

03/07/2016, 09:25 PM	#3
higgs83 Registered Member Join Date: Mar 2016 Posts: 22	That housing would make for a nice starting point towards a RODI! Good stuff.