|
12/02/2006, 02:16 PM | #1 |
Registered Member
Join Date: Sep 2004
Location: Dallas TX
Posts: 1,520
|
calibration/instructions for a Milwaukee SMS122 Ph Monitor?
Does anyone have calibration instructions for a Milwaukee SMS122?
|
12/02/2006, 04:32 PM | #2 |
Registered Member
Join Date: May 2005
Location: Never,Never Land
Posts: 7,061
|
Ask
RANDY HOLMES-FARLEY In reef chemestry forum.
__________________
We the few have done so much,for so long,for so little.That we are now qualified to do anything with nothing. ____________________________________________________________________________ Current Tank Info: RR 90 Maganvore sump,250w Hamilton fixture,VorTec's ASM skimmer. |
12/02/2006, 04:36 PM | #3 |
Registered Member
Join Date: Feb 2004
Location: O'Fallon, IL
Posts: 2,465
|
Go to www.milwaukeetesters.com there is a manuals section that includes the SMS122.
from the site. CALIBRATION PROCEDURE: • Remove the protective cap from the electrode. • Immerse the electrode tip into a new sachet of pH 7 calibration solution and allow the reading to stabilize. • Adjust the OFFSET calibration trimmer (on the front) to display "7.0 pH". • Open a new sachet of pH 4 calibration solution and use a small quantity to rinse the electrode. • Immerse the electrode tip into the pH 4 sachet and allow the reading to stabilize. • Adjust the SLOPE calibration trimmer (on the rear) to display "4.0 pH". • The calibration is now complete and the meter is ready to take measurements. • It is suggested to recalibrate the meter at least once a month, after a prolonged stocking time and after pH-electrode replacement. I also got this card in mine that says to use one point calibration. -Mike |
12/03/2006, 11:37 AM | #4 |
Registered Member
Join Date: Sep 2004
Location: Dallas TX
Posts: 1,520
|
Thank you very much!!!!!!!!!!!!!!!!!!!
|
09/03/2011, 12:55 PM | #5 |
Registered Member
Join Date: Sep 2011
Posts: 1
|
pH callibration
Is the solution reusable?
I got a bottle shipped to me in my box? |
|
|