|
01/12/2019, 10:17 AM | #1 |
Registered Member
Join Date: Nov 2017
Location: Middle TN
Posts: 200
|
What is a "small" lighting adjustment?
I would like to begin increasing the light intensity on my AI Hydra LEDs... How much is too much at a time (percentage wise). I plan to keep the same spectrum.
The controls for the light percentages are a PITA so I'm wondering how exact I need to try to be, and how much to raise in what interval? All light wave lengths are currently below 50% intensity. Sent from my SM-G950U using Tapatalk
__________________
Build Thread: "A new reefer... a new tank. What could go wrong?" Current Tank Info: Red Sea Reefer 425 XL Deluxe, Nano Max, 55g Observation, 20g QT |
01/12/2019, 09:19 PM | #2 |
Registered Member
Join Date: Aug 2018
Location: northen Wv
Posts: 192
|
I say adjust 2% at a time
|
01/12/2019, 09:52 PM | #3 |
Crab Free Zone
Join Date: Sep 2017
Location: Ontario, Canada
Posts: 2,906
|
50% of that lights output is still strong, depends on why your increasing light, what tells you not its not currently enough?
I agree the 2% increase but what's the overall increase going to be. Way easier to kill with too much light rather than not enough. If your thinking 10% spread out over a month or so, that would work. Then I would give them 6 months to see if that increase had a positive effect, also, did the increase affect others negatively.... |
01/13/2019, 02:40 AM | #4 |
Registered Member
Join Date: Dec 2015
Location: Nebraska/Missouri
Posts: 770
|
I think your intensity is was too low. What are you running your greens and reds at? I keep my UV and violet over 100% and the blues around 80%. You should be able to adjust any color 10% a week without any problems. I've read that a good starting point is 1 to 1.5w per gallon.
__________________
72x24x16 115 gallon under construction Current Tank Info: 40 gallon reef |
|
|