|
04/23/2019, 03:26 PM | #1 |
Registered Member
Join Date: Jun 2004
Location: Boston
Posts: 384
|
Drilling Acrylic tank for overflow???
Hi I was wondering if anyone has drilled an acrylic tank for a Synergy Overflow or similar style overflow.
I saw a 185 gallon Tenecor Acrylic tank for a good price but it has no overflow at all. Does anyone know if it is a good idea to drill an acrylic tank for an overflow ? Sent from my HTC U11 using Tapatalk
__________________
"Steel Curtain" Current Tank Info: 110 gallon Oceanic Fish Only with Live rock, Purple Tang,2- Oscellaris Clown, Foxface Lo, Royal Gramma, and Coral Beauty |
04/23/2019, 04:24 PM | #2 |
Registered Member
Join Date: Jun 2012
Location: Davie, FL
Posts: 1,778
|
Drilling Acrylic is easy.
I’ve drilled acrylic dumps before. It can be done with a standard hole saw. Glass is the difficult one. Sent from my iPhone using Tapatalk
__________________
Steve Current Tank Info: 55 Gallon Mixed Reef |
04/23/2019, 06:05 PM | #3 |
Registered Member
Join Date: Apr 2013
Posts: 35
|
For the best outcome, use a router and a jig but it should be safe
|
04/24/2019, 10:56 AM | #4 |
Registered Member
Join Date: Apr 2008
Location: Grove City, Ohio
Posts: 10,806
|
It doesn't get much easier. Just like with glass, don't get too close to any edge - ~ 1 hole diameter away to avoid stress on the panel. I would use a new standard wood hole saw. Don't go too fast or you risk melting the acrylic and getting a rough cut, or worse yet, the bit binding and fusing to the offcut.
__________________
I'll try to be nice if you try to be smarter! I can't help that I grow older, but you can't make me grow up! Current Tank Info: 120 mixed reef with 40b sump, RO 150 skimmer, AI Sol Blue x 2, and a 60g Frag Tank with 100g rubbermaid sump. 2 x Kessil A360w lights, BM curve 5 skimmer |
Thread Tools | |
|
|