Pump Danner Vs. Ehiem - Page 2

calli · 05/16/2018, 03:55 PM

Has anyone ever used the Jaebo 10000 dc pumps? How are they?

Sent from my iPhone using Tapatalk

calli · 05/17/2018, 07:53 AM

Quote:

Originally Posted by Left Coast DJ

Go DC.

Have you heard much about the Jebao DCP 10000 Sine tech Silent Pump (1720 to 2640 GPH)?

Is that a good one?

M I K E · 05/24/2018, 07:02 AM

I run eheim 1262 on my 90gal that sits abt 3.5 to 4ft below the return nozzle. Originally set up with 3/4" flex hose return and flow is no problem. Switched to 1" pvc with 4 90 deg elbows and had to throttle it down with a ball valve because the rate increased so much that it would churn the living hell out of everything. I also manifold my return to supply a 3 chamber reactor setup with plenty of horsepower to spare. I'd say it would make a great pump for your setup. Just make sure you go with a 1" return and you should have no probs.

05/16/2018, 03:55 PM	#26
calli Registered Member Join Date: Jun 2008 Location: London, Ontario Posts: 512	Has anyone ever used the Jaebo 10000 dc pumps? How are they? Sent from my iPhone using Tapatalk

05/24/2018, 07:02 AM	#28
M I K E Registered Member Join Date: Feb 2018 Posts: 4	I run eheim 1262 on my 90gal that sits abt 3.5 to 4ft below the return nozzle. Originally set up with 3/4" flex hose return and flow is no problem. Switched to 1" pvc with 4 90 deg elbows and had to throttle it down with a ball valve because the rate increased so much that it would churn the living hell out of everything. I also manifold my return to supply a 3 chamber reactor setup with plenty of horsepower to spare. I'd say it would make a great pump for your setup. Just make sure you go with a 1" return and you should have no probs.