|
04/15/2018, 09:44 AM | #1 |
Team RC Member
Join Date: Nov 2001
Location: Rochester, NY
Posts: 41,560
|
Varios pump controller
Varios pump on Octopus skimmer has a start up delay of a couple of seconds when powering up.
Is there a way to increase the startup time to several minutes?
__________________
over 24 years experience with multiple types of marine aquarium systems *see Upstate Reef Society Forum on RC and FB* GOOGLE JUNIOR'S REEF Current Tank Info: 84x24x30 265g reef past TOTM honors |
04/15/2018, 09:45 AM | #2 |
Registered Member
Join Date: Feb 2016
Posts: 143
|
Probably not it most likely does that to not overcurrent the pump but check the website for any info for that pump
Sent from my iPhone using Tapatalk |
04/16/2018, 09:17 AM | #3 |
Registered Member
Join Date: Dec 2011
Posts: 778
|
I don't think its a start up delay rather a start up ramp up i think they called it a soft start
|
04/16/2018, 07:18 PM | #4 |
Team RC Member
Join Date: Nov 2001
Location: Rochester, NY
Posts: 41,560
|
is there any way of delaying a soft start?
__________________
over 24 years experience with multiple types of marine aquarium systems *see Upstate Reef Society Forum on RC and FB* GOOGLE JUNIOR'S REEF Current Tank Info: 84x24x30 265g reef past TOTM honors |
04/17/2018, 04:24 AM | #5 |
Registered Member
Join Date: Mar 2008
Location: Farmington, NY
Posts: 757
|
It may be a safety feature of the manufacturer so the pump dosen't take the hit from the inrush voltage.
__________________
Don Havens Current Tank Info: 50 Gallon Ecotech SCA Cube |
04/17/2018, 05:09 PM | #6 |
Registered Member
Join Date: Nov 2002
Location: Miller Place, NY
Posts: 7,206
|
Only way I know of is through a controller.
__________________
250 gallon mixed reef, 2 Reefbreeder's Photon V 2, Deepwater BLDC 12, DAS EX-3 Skimmer, MTC mini cal, 2-3/4" Sea Swirls, Aquacontroller & 6 Tunze pumps. |
04/20/2018, 05:02 AM | #7 |
Team RC Member
Join Date: Nov 2001
Location: Rochester, NY
Posts: 41,560
|
I think you are correct, Vinny. Thanks!
__________________
over 24 years experience with multiple types of marine aquarium systems *see Upstate Reef Society Forum on RC and FB* GOOGLE JUNIOR'S REEF Current Tank Info: 84x24x30 265g reef past TOTM honors |
04/28/2018, 07:36 AM | #8 |
Registered Member
Join Date: Apr 2007
Location: Tampa
Posts: 3,455
|
Do you use an apex? There is cable for the varios that connects it to a variable port on the apex.
My program for my skimmer pump is: Fallback Skimmer Set RampSkimmer If FeedB 000 Then OFF RampSkimmer profile: Ramp time: 45 Start intensity: 28 End intensity: 64 28 seems to be enough to get the pump moving without the water climbing up the skimmer neck. |
04/28/2018, 07:38 AM | #9 |
Team RC Member
Join Date: Nov 2001
Location: Rochester, NY
Posts: 41,560
|
I run an AC jr
I wonder if it can do the same thing?
__________________
over 24 years experience with multiple types of marine aquarium systems *see Upstate Reef Society Forum on RC and FB* GOOGLE JUNIOR'S REEF Current Tank Info: 84x24x30 265g reef past TOTM honors |
04/28/2018, 12:04 PM | #10 |
Registered Member
Join Date: Apr 2007
Location: Tampa
Posts: 3,455
|
You would need a VDM. You can usually pick them up used for $50-60. I believe that the variable ports are one of the differences between the apex and apex jr.
Last edited by cardiffgiant; 04/28/2018 at 12:11 PM. |
04/29/2018, 07:43 AM | #11 |
Registered Member
Join Date: Jan 2010
Location: Rush NY
Posts: 108
|
If all you want to do is delay the start of your skimmer pump for a few minuets after your return pump starts to allow water level in sump to stabilize and you have an Apex with both the skimmer and return pumps plugged into the apex is to add a line to the skimmer outlet that says defer x minuets.
My outlets are named: Pump_Return Skimmer Skimmer program Fallback ON Set ON If Output Pump_Return = OFF Then OFF Defer 005:00 Then ON |
|
|