|
03/30/2012, 05:29 PM | #1 |
im an addict lol
Join Date: Jul 2006
Location: Land o lakes, FLorida
Posts: 12,930
|
help me buy a new controller
Ok background. I'm still oldschool. I want to step into apex line. I am currently using old acII and acjr. To many options out there to buy. Help me get what I need with out going over board and waisting $$$
I want the basics of course, but I also want to be able to control my leds. I am using meanwell drivers currently with the 1-10v dimmable controll on dimm 4 controller as my currant aqua controller dosnt do led dimming. I want 2 ph controlls one for tank 1 for cal reactor. Temp control for tank. It would be nice to have the temp control on led fixture for fans also. I would also like to be able to control 2 seperate float switches one to top off with kalk when ph is low and one that just uses rodi when ph is hig enough. I think that's about it. Please let me know what package I need to get and any add ons I would need. Thanks Roger
__________________
Goal levels: salinity 35ppt, temp 78-79, alk 8-9, cal 430-450, mag 1310-1400 po4 .03, no3 1-3 Current Tank Info: System 1... 100 gal Zoa tank I built, 30 gal Ric Yuma shroom tank, 30 gal mix tank my sons,40 gal softie tank, 40 gal nem tank, two 40 gal LPS tank. System 2... 240 gal SPS display attached 100 gal frag SPS only tank. |
03/30/2012, 07:38 PM | #2 |
Registered Member
Join Date: Feb 2011
Posts: 380
|
AquaController Apex (full version)
Comes with: 1 Apex Base Unit 1 Temperature Probe 1 Apex Display Module w/ 10’ AquaBus cable 1 EnergyBar 8 1 6’ AquaBus cable 1 Standard Grade pH probe (may be upgraded to lab probe) 1 Owner’s Manual Breakout Box (for the floats) 2 Channel Apex to Light Dimming Cable (For the LED Drivers) 4.00 Calibration Fluid (for pH probe in CA RX) 7.00 Calibration Fluid (for pH probe in CA RX and tank) 10.00 Calibration Fluid (for pH probe in tank) If you plan on ORP probe you will need to get the PM1 if not never mind this. |
03/30/2012, 08:25 PM | #3 |
im an addict lol
Join Date: Jul 2006
Location: Land o lakes, FLorida
Posts: 12,930
|
Full version comes with breakout box for led? Or is that extra?
How much will all that set me back? What is the difference with the light version and so on?
__________________
Goal levels: salinity 35ppt, temp 78-79, alk 8-9, cal 430-450, mag 1310-1400 po4 .03, no3 1-3 Current Tank Info: System 1... 100 gal Zoa tank I built, 30 gal Ric Yuma shroom tank, 30 gal mix tank my sons,40 gal softie tank, 40 gal nem tank, two 40 gal LPS tank. System 2... 240 gal SPS display attached 100 gal frag SPS only tank. |
03/31/2012, 01:11 AM | #4 | |
Registered Member
Join Date: Feb 2011
Posts: 380
|
Quote:
The Breakout box is just for the float switches. AquaController Apex (full version) Comes with: 1 Apex Base Unit 1 Temperature Probe 1 Apex Display Module w/ 10’ AquaBus cable 1 EnergyBar 8 1 6’ AquaBus cable 1 Standard Grade pH probe (may be upgraded to lab probe) 1 Owner’s Manual Extras you will have to purchase to complete your goals: Breakout Box (for the floats) 2 Channel Apex to Light Dimming Cable (For the LED Drivers) 4.00 Calibration Fluid (for pH probe in CA RX) 7.00 Calibration Fluid (for pH probe in CA RX and tank) 10.00 Calibration Fluid (for pH probe in tank) If you plan on ORP probe you will need to get the PM1 if not never mind this. |
|
04/02/2012, 04:31 PM | #5 |
im an addict lol
Join Date: Jul 2006
Location: Land o lakes, FLorida
Posts: 12,930
|
Thanks.
So I'm sure here the float swiches with for ato right? Do they have any other function? Also do I need to buy anything special to be able to use my android phone with the controller? Roger
__________________
Goal levels: salinity 35ppt, temp 78-79, alk 8-9, cal 430-450, mag 1310-1400 po4 .03, no3 1-3 Current Tank Info: System 1... 100 gal Zoa tank I built, 30 gal Ric Yuma shroom tank, 30 gal mix tank my sons,40 gal softie tank, 40 gal nem tank, two 40 gal LPS tank. System 2... 240 gal SPS display attached 100 gal frag SPS only tank. |
|
|