|
07/19/2010, 12:27 PM | #76 |
Team RC Member
Join Date: Sep 2003
Location: NY
Posts: 17,749
|
You can control many drivers from a single PWM pin on an Arduino, but of course they'll be controlled together - if you have 8 drivers and you want to control all 8 independently, you'll need a Mega, or a Mega clone, as the ATMega1280 it's based on has 14 channels of PWM.
__________________
Inconveniencing marine life since 1992 "It is my personal belief that reef aquaria should be thriving communities of biodiversity, representative of their wild counterparts, and not merely collections of pretty specimens growing on tidy clean rock shelves covered in purple coralline algae." (Eric Borneman) |
07/19/2010, 03:10 PM | #77 | |
Registered Member
Join Date: Jan 2009
Location: Texas
Posts: 57
|
Quote:
__________________
www.thereeftank.com/forums/f6/fish-room-addition-video-build-172151.html www.vimeo.com/user5458035 www.thereeftank.com/forums/f76/diy-dimmable-led-fixture-from-scratch-151097.html Current Tank Info: 180 Gallon In-Wall, 75 gal. Sump |
|
07/29/2010, 07:25 AM | #78 |
Registered Member
Join Date: Mar 2008
Posts: 75
|
How about the teensyduino?? It had 9 pwm pin.
|
07/29/2010, 07:30 AM | #79 |
Team RC Member
Join Date: Sep 2003
Location: NY
Posts: 17,749
|
You mean the Teensy or Teensy++?
It's nice, but it uses a non-standard AVR, which means some functions are either in the "wrong" places or require workarounds. Plus, it uses a closed-source bootloader, which I don't like.
__________________
Inconveniencing marine life since 1992 "It is my personal belief that reef aquaria should be thriving communities of biodiversity, representative of their wild counterparts, and not merely collections of pretty specimens growing on tidy clean rock shelves covered in purple coralline algae." (Eric Borneman) |
07/29/2010, 07:53 AM | #80 |
Registered Member
Join Date: Mar 2008
Posts: 75
|
|
07/29/2010, 07:59 AM | #81 |
Team RC Member
Join Date: Sep 2003
Location: NY
Posts: 17,749
|
Roughly compatible. You can program them using the Arduino IDE, once you've performed some tweaks to the environment as detailed on that site, but many of the AVR's hardware functions are in different spots (SPI, One Wire, PWM, etc.) so in some cases you need to tweak libraries or sketch code to get things to work.
Plus there's the closed source bootloader thing. If you manage to erase the bootloader, the device is bricked. Or if the vendor goes under, you're stuck with zero chance of support. Given the open source nature of the official bootloader, neither of those problems will ever happen.
__________________
Inconveniencing marine life since 1992 "It is my personal belief that reef aquaria should be thriving communities of biodiversity, representative of their wild counterparts, and not merely collections of pretty specimens growing on tidy clean rock shelves covered in purple coralline algae." (Eric Borneman) |
07/29/2010, 11:54 AM | #82 |
Team RC Member
Join Date: Sep 2003
Location: NY
Posts: 17,749
|
Drumroll please. . . .
It's not complete yet - I forgot to get a socket for the AVR and the trimpot I ordered for contrast on the LCD has the wrong pinout. But I'll put another order in today and hopefully will be testing early next week. Now it's time to write software. . .
__________________
Inconveniencing marine life since 1992 "It is my personal belief that reef aquaria should be thriving communities of biodiversity, representative of their wild counterparts, and not merely collections of pretty specimens growing on tidy clean rock shelves covered in purple coralline algae." (Eric Borneman) |
07/29/2010, 01:42 PM | #83 |
Registered Member
Join Date: Apr 2007
Location: mission viejo
Posts: 524
|
sounds good
so, is this going to be an inexpensive kit or something along those lines? |
07/29/2010, 02:20 PM | #84 |
Team RC Member
Join Date: Sep 2003
Location: NY
Posts: 17,749
|
I'm not in this in any sort of commercial sense - I'm releasing it as an open source hardware and software project. That means you'll be free to build it yourself. That said, I will likely have leftover prototype PCBs so if you want to work something out, shoot me a PM.
__________________
Inconveniencing marine life since 1992 "It is my personal belief that reef aquaria should be thriving communities of biodiversity, representative of their wild counterparts, and not merely collections of pretty specimens growing on tidy clean rock shelves covered in purple coralline algae." (Eric Borneman) |
07/29/2010, 06:37 PM | #85 |
Registered Member
Join Date: Mar 2006
Location: williamstown NJ
Posts: 713
|
LOOKS GOOD Der Wille
|
07/29/2010, 06:53 PM | #86 |
Registered Member.
Join Date: Feb 2010
Location: Naples, FL
Posts: 218
|
Kthx, I'll buy one now!
|
07/29/2010, 10:17 PM | #87 | |
Registered Member
Join Date: Oct 2009
Location: Findlay, OH
Posts: 851
|
Quote:
So if you are out of those prototype boards, how would we go about getting one made up? I only ask because I have absolutely no idea of where to even start. Thanks for all your work on this!!! Scott |
|
07/30/2010, 07:02 AM | #88 |
Registered Member
Join Date: Oct 2006
Location: Chennai, India
Posts: 385
|
Der, with regards to increasing the PWMs, i have used the TLC5940, and increased the PWMS to 32... i dont use all of them though.
Just made a separate board between my controller and the LED driver to accomodate the PWMS. The details are here: http://www.arduino.cc/playground/Learning/TLC5940 i have tested it and it works. It totally uses 5 Digital pins, plus you have 2 free PWM pins also.
__________________
Attitude is contagious, is yours worth Catching? Current Tank Info: 8x2.75x2.25 375 gallon tank - with DIY LEDs, MP40wES, tunze 6105, SRO SSS5000 int Skimmer |
07/30/2010, 10:29 AM | #89 |
Team RC Member
Join Date: Sep 2003
Location: NY
Posts: 17,749
|
Scott,
There are a bunch of ways to get a PCB made from a design. I'll publish the design as Eagle project files, so you can generate gerbers and send them to any board house you want to use. Board houses vary in price, minimum orders, and features so it helps to know what you want before you set out. For example, patchPCB will make one-offs but they're a little more expensive than other places. Seeedstudio has great prices but only sells in sets of 10. And so on. Perikaruppan, I've played with the TLC series a bit. It works great for some things but not so good for other things. It consumes a fair amount of resources on the AVR and the PWM frequency it generates is too high for some uses. I've never used it to drive ELNs though, so maybe it would be OK in that role.
__________________
Inconveniencing marine life since 1992 "It is my personal belief that reef aquaria should be thriving communities of biodiversity, representative of their wild counterparts, and not merely collections of pretty specimens growing on tidy clean rock shelves covered in purple coralline algae." (Eric Borneman) |
07/30/2010, 12:07 PM | #90 |
Registered Member
Join Date: Oct 2006
Location: Chennai, India
Posts: 385
|
driving LED's using those, do you see any problems? or can i get the proper PCB made?
__________________
Attitude is contagious, is yours worth Catching? Current Tank Info: 8x2.75x2.25 375 gallon tank - with DIY LEDs, MP40wES, tunze 6105, SRO SSS5000 int Skimmer |
07/30/2010, 12:11 PM | #91 |
Team RC Member
Join Date: Sep 2003
Location: NY
Posts: 17,749
|
If you're talking about driving HP LEDs DIRECTLY from the TLC in order to light a fish tank, it won't really work. The current/power limits on the chip are way too low to be practical. You'd be driving a very small number of LEDs on each TLC and you'd need enough of them that cost would be pretty high.
__________________
Inconveniencing marine life since 1992 "It is my personal belief that reef aquaria should be thriving communities of biodiversity, representative of their wild counterparts, and not merely collections of pretty specimens growing on tidy clean rock shelves covered in purple coralline algae." (Eric Borneman) |
07/30/2010, 01:22 PM | #92 |
Registered Member
Join Date: Oct 2006
Location: Chennai, India
Posts: 385
|
I am using the TLC's to drive the CAT4101 Driver to Drive 6 LEDs, so each TLC will drive 16X6 =96 LEDS, not directly though.
__________________
Attitude is contagious, is yours worth Catching? Current Tank Info: 8x2.75x2.25 375 gallon tank - with DIY LEDs, MP40wES, tunze 6105, SRO SSS5000 int Skimmer |
07/30/2010, 01:53 PM | #93 |
Team RC Member
Join Date: Sep 2003
Location: NY
Posts: 17,749
|
Yeah, I could see that working. You'll probably get some cutoff near the bottom of the dimming spectrum thanks to the TLC's high frequency but that's probably OK for most people.
__________________
Inconveniencing marine life since 1992 "It is my personal belief that reef aquaria should be thriving communities of biodiversity, representative of their wild counterparts, and not merely collections of pretty specimens growing on tidy clean rock shelves covered in purple coralline algae." (Eric Borneman) |
08/05/2010, 03:11 PM | #94 |
Team RC Member
Join Date: Sep 2003
Location: NY
Posts: 17,749
|
Got the rest of the parts. The base hardware (AVR, RTC, LCD) is working.
Next up: Verify the PWM outputs and write firmware.
__________________
Inconveniencing marine life since 1992 "It is my personal belief that reef aquaria should be thriving communities of biodiversity, representative of their wild counterparts, and not merely collections of pretty specimens growing on tidy clean rock shelves covered in purple coralline algae." (Eric Borneman) |
08/05/2010, 03:40 PM | #95 |
GET OFF MY LAWN
Join Date: Jul 2007
Location: Globally
Posts: 5,863
|
Uber cool! Very smart idea. Once all is up and running, would love to buy a board to tinker with.
__________________
No great genius has ever existed without some touch of madness ~ Aristotle If we knew what it was we were doing, it would not be called research, would it? ~ Albert Einstein I'm just as bent as ever. Hellishly so ~ Captain Jack Sparrow Current Tank Info: Systems and goodies by Lee-Mar / Coralvue / Neptune Systems / Jager / Spectrapure / Cree / Meanwell + more! |
08/05/2010, 04:18 PM | #96 |
Registered Member
Join Date: Apr 2007
Location: mission viejo
Posts: 524
|
+1 here
|
08/05/2010, 09:14 PM | #97 |
Registered Member
Join Date: May 2010
Posts: 54
|
I would love one of the boards as well if there are any left
Just let me know Cory |
08/08/2010, 07:24 PM | #98 |
Getting there
Join Date: Dec 2009
Location: Friendswood, Tx
Posts: 884
|
(Sorry Dwizum, couldn't help myself. Its all that time I've spent in the lounge)
I just got Dwiz's working prototype. Here's a pic. LOL. ~Frank
__________________
The only thing I know for sure is nothing! Carrie, why do you want someone in need to die? -iCam Current Tank Info: 29G BioCube with LED lighting, media basket, fuge (chamber 2), MJ1200 return pump, K nano & K 1 power heads, 32# LR, ~2" SB |
08/08/2010, 08:57 PM | #99 |
Registered Member
Join Date: Jun 2007
Location: Waterford, MI
Posts: 790
|
wow looks great dwzm!
|
08/11/2010, 07:16 AM | #100 |
Team RC Member
Join Date: Sep 2003
Location: NY
Posts: 17,749
|
It's 8:48 AM. Do you know what duty cycle your LEDs are running at? I do. All 4 channels are at 80%.
__________________
Inconveniencing marine life since 1992 "It is my personal belief that reef aquaria should be thriving communities of biodiversity, representative of their wild counterparts, and not merely collections of pretty specimens growing on tidy clean rock shelves covered in purple coralline algae." (Eric Borneman) |
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cheap Moonlight | ticklesworth | New to the Hobby | 3 | 04/04/2010 04:09 PM |
Cheap Moonlight | ticklesworth | Do It Yourself | 0 | 04/03/2010 08:52 AM |
Arduino base controller - power pack ONLY TODAY | MaLi | Do It Yourself | 0 | 03/07/2010 05:56 AM |
Sumps 101: Cheap, simple and effective for small tanks | cody6766 | Central Oklahoma Marine Aquarium Society | 8 | 01/06/2009 10:57 AM |