2 x 6095 and a 7090.3 cable

brians_224 · 07/24/2017, 06:11 PM

Hi are there any step by step instructions on how to set up and configure 2 x 6095 and a 7090.3 cable?

rvitko · 07/25/2017, 08:01 AM

They are in the 6095 manual. The basics are the one that will be a slave is set to external mode. The main speed should be set to maximum. Then all settings are done on the other pump. By default it is synchronous so the two pumps do the exact same thing, to set this to inverse so one is on pulse speed and one is on main speed, hold the food timer button on the slave unit in external mode, the light will flash indicating it is now in inverse mode.

brians_224 · 07/25/2017, 08:55 PM

Thanks Roger

Im not sure that I have things set up correctly.

I have one power head on one end and the other on the opposite end of the tank.

The inverse mode - my master controller is solid red on the pulse led, while my slave, if I put it in non external mode, flashes red on the pulse led. Is this correct?

Do the flashing of the buttons on the controller represent operation - in inverse mode should the flash alternately? or at the same time?

Also, does the feed button work in external mode?

Thanks again for your time!

rvitko · 07/26/2017, 08:29 AM

Yes, that is correct, except set it back to external mode on the one with flashing pulse light. The food button on the main pump not in external mode will operate both pumps. The one in external mode is left alone and all control is now by the other controller.

07/24/2017, 06:11 PM	#1
brians_224 Registered Member Join Date: Jan 2004 Location: Brookfield, WI Posts: 1,172	2 x 6095 and a 7090.3 cable Hi are there any step by step instructions on how to set up and configure 2 x 6095 and a 7090.3 cable?

07/25/2017, 08:01 AM	#2
rvitko RC Sponsor Join Date: Apr 2000 Location: Austin Texas USA Posts: 35,785	They are in the 6095 manual. The basics are the one that will be a slave is set to external mode. The main speed should be set to maximum. Then all settings are done on the other pump. By default it is synchronous so the two pumps do the exact same thing, to set this to inverse so one is on pulse speed and one is on main speed, hold the food timer button on the slave unit in external mode, the light will flash indicating it is now in inverse mode. __________________ Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish

07/26/2017, 08:29 AM	#4
rvitko RC Sponsor Join Date: Apr 2000 Location: Austin Texas USA Posts: 35,785	Yes, that is correct, except set it back to external mode on the one with flashing pulse light. The food button on the main pump not in external mode will operate both pumps. The one in external mode is left alone and all control is now by the other controller. __________________ Roger Vitko Tunze USA "He's for every one of us, stands for every one of us, he'll save every man, woman and child in a mighty Flash!" Current Tank Info: 210 gallon planted tank with Altum Angelfish

07/25/2017, 08:55 PM	#3
brians_224 Registered Member Join Date: Jan 2004 Location: Brookfield, WI Posts: 1,172	Thanks Roger Im not sure that I have things set up correctly. I have one power head on one end and the other on the opposite end of the tank. The inverse mode - my master controller is solid red on the pulse led, while my slave, if I put it in non external mode, flashes red on the pulse led. Is this correct? Do the flashing of the buttons on the controller represent operation - in inverse mode should the flash alternately? or at the same time? Also, does the feed button work in external mode? Thanks again for your time!