Vertex Illumina Club - Page 58

MrsBugmaster · 10/09/2016, 07:32 AM

Quote:

Originally Posted by johnyfalco

It sounds like the the little watch size battery, that holds all the program, date, etc, has gone flat. The battery needs replacing. If you want to know how to do it, ask me while its still fresh in this old memory. I have just done this on a 360.

I can't even get that far, I can not get the software loaded on my new computer. I did manually adjust the clock on the light so it is correct now. The light is holding what is programed. I can not do anything from my computer,

xport · 10/27/2016, 08:41 AM

hey have 2 vertex iliumina 90 cm, when I Connect them to my computer then It's just posible to adjust the blue and white and not royal blue. royal blue is not funtion on the lamp eighter. update the pads , . Then update the firmvare but same problem .
Anyone who has proposed solution?

Sorry for my bad english

redddogg69 · 10/28/2016, 08:04 AM

Quote:

Originally Posted by MrsBugmaster

I can't even get that far, I can not get the software loaded on my new computer. I did manually adjust the clock on the light so it is correct now. The light is holding what is programed. I can not do anything from my computer,

Are you using a Mac? The vertex desktop won't work with either El Capitan or Sierra.

Quote:

Originally Posted by xport

hey have 2 vertex iliumina 90 cm, when I Connect them to my computer then It's just posible to adjust the blue and white and not royal blue. royal blue is not funtion on the lamp eighter. update the pads , . Then update the firmvare but same problem .
Anyone who has proposed solution?

Sorry for my bad english

Does the royal blue channel not show up? or does it just not light up on the pads?

xport · 10/28/2016, 08:43 AM

Yes the royal blue channel show up and it's posible to adjust , but does not light up on the pads.

Regards Frode

xport · 10/28/2016, 08:47 AM

The funny thing is that this 2 lamps are bought from to difrent people and the lamps have the same problem

redddogg69 · 10/28/2016, 08:58 AM

Quote:

Originally Posted by xport

The funny thing is that this 2 lamps are bought from to difrent people and the lamps have the same problem

Make sure that they are on different channels unless you are operating them as master and slave. Other than that, try a factory reset.

5Starreef · 12/30/2016, 11:55 AM

Do you guys has a USB V Link you are not using anymore?. I am trying to connect with my V Link and it is not working either on Windows 7 or 10. If you have one please shoot me a PM.

Hudds · 12/30/2016, 02:03 PM

Quote:

Originally Posted by 5Starreef

Do you guys has a USB V Link you are not using anymore?. I am trying to connect with my V Link and it is not working either on Windows 7 or 10. If you have one please shoot me a PM.

Try updating/reinstalling v-link firmware.
I believe the desktop software is not operational with Windows 10.

GCG · 12/30/2016, 05:40 PM

Hi i'm new to the vertex illuminia club and have just got a 1200mm 260. I have 3 additional mixed pucks and 2 UV. Do any of you have a setup file I could have which could be used as a template?

Thanks

5Starreef · 12/30/2016, 07:17 PM

I tried it but The Vertex Desktop on Windows 7 is not displaying the Firmware Update Option.

Hudds · 01/01/2017, 12:29 PM

Quote:

Originally Posted by 5Starreef

I tried it but The Vertex Desktop on Windows 7 is not displaying the Firmware Update Option.

Visit their website, there is a downloads section with all manuals and firmwares.

SilverHalide · 01/04/2017, 10:06 AM

I have a SR260 that I just began using a few months ago. It was still in the box when Hurricane Sandy destroyed my old tank. It took me this long to get things started again. I am looking to purchase vertex illumina auxiliary modules. where can I buy these? I feel like I woke up from a four year coma when it comes to reefing.

Vinny Kreyling · 01/04/2017, 12:51 PM

Only 1 place I know of out of Germany:
Vertex Technologies Inc.
714-274-6544
Adam Schoefeld

Smocky · 01/04/2017, 03:57 PM

Hi guys. Sorry if i jump in the discussion with an usual question regarding the setting up of the Sr260, but it's months that i'm trying to set it without success. Could you kindly share some pictures of program in order to copy it in my configuration? I Want to have sps. Actually the light is positioned at 4" from the water. Thanks in advance and sorry to insert another issue have seen a lot of times. Rgs Antonio

Inviato dal mio iPad utilizzando Tapatalk

Smocky · 01/04/2017, 04:00 PM

A precisation.. no multicolor pads are present in my lighting. Only the white, blue and royal blue

Inviato dal mio iPad utilizzando Tapatalk

Vinny Kreyling · 01/04/2017, 05:18 PM

Smocky,
What sized tank & depth?

Smocky · 01/05/2017, 03:44 AM

Hi Vinny. My tank is 80 gallons. The depth is 21 ". Thanks for the help !

Inviato dal mio iPad utilizzando Tapatalk

ClownBubbaJoe · 01/11/2017, 01:12 PM

I need the cord and the software for a Vertex Illumina, where can I purchase them ?

I tried this address, angd got to the website, but says it's under construction.

vertex Industries, Huntington Beach, CA

http://www.vertextechnologies.net

Hudds · 01/11/2017, 02:36 PM

Try here http://www.vertexaquaristik.com

ClownBubbaJoe · 01/11/2017, 04:51 PM

I'll have to send the link to my office computer, as this tablet doesn't support plug in's ?
Thanks !

ClownBubbaJoe · 01/11/2017, 05:05 PM

NI looked at a sticker on the light and reads,...600-200, and 00049E.
So, which model is it ?

SR200 ?

I just clicked on the SR200 and all the others as well,...on the list, and it refresh's the page, but nothing happens ?

Don't get it, but when the clicked on the pop-up, it revield the site anyway ? Computers !?

Anyway, still confused on which model I have ?

Vinny Kreyling · 01/11/2017, 05:29 PM

ClownBubbaJoe,
That phone # I listed above should get you to Adam & he is the rep in the area.
Serial # & all other info can be found through the display on the end.

5Starreef · 01/12/2017, 08:25 PM

Looking for Vertex Illumina Owners in South Florida, please sent me pm , I am looking to borrow a Vertex VLink USB

ClownBubbaJoe · 01/12/2017, 09:10 PM

Quote:

Originally Posted by Vinny Kreyling

ClownBubbaJoe,
That phone # I listed above should get you to Adam & he is the rep in the area.
Serial # & all other info can be found through the display on the end.

Great, I'll call tomorrow.
Thanks !

Pool Man · 01/16/2017, 06:46 AM

Couple of questions hopefully someone will here will know. It appears one of my standard Blue/White pads went out on my 3ft SR360.

#1 Are the pads the same on the SR260 as the SR360? Aside from the power output, I really don't know the difference. Is it a viable option?

#2Does anyone have an extra they'd sell? PM me if you do!

10/27/2016, 08:41 AM	#1427
xport Registered Member Join Date: Feb 2010 Location: west cost Norway Posts: 26	Problems vertex LED Illumina lamps hey have 2 vertex iliumina 90 cm, when I Connect them to my computer then It's just posible to adjust the blue and white and not royal blue. royal blue is not funtion on the lamp eighter. update the pads , . Then update the firmvare but same problem . Anyone who has proposed solution? Sorry for my bad english

12/30/2016, 11:55 AM	#1432
5Starreef Registered Member Join Date: Oct 2009 Location: Mia, Florida Posts: 180	Do you guys has a USB V Link you are not using anymore?. I am trying to connect with my V Link and it is not working either on Windows 7 or 10. If you have one please shoot me a PM. __________________ Natural Reef

12/30/2016, 07:17 PM	#1435
5Starreef Registered Member Join Date: Oct 2009 Location: Mia, Florida Posts: 180	I tried it but The Vertex Desktop on Windows 7 is not displaying the Firmware Update Option. __________________ Natural Reef

01/04/2017, 12:51 PM	#1438
Vinny Kreyling Registered Member Join Date: Nov 2002 Location: Miller Place, NY Posts: 7,206	Only 1 place I know of out of Germany: Vertex Technologies Inc. 714-274-6544 Adam Schoefeld __________________ 250 gallon mixed reef, 2 Reefbreeder's Photon V 2, Deepwater BLDC 12, DAS EX-3 Skimmer, MTC mini cal, 2-3/4" Sea Swirls, Aquacontroller & 6 Tunze pumps.

01/04/2017, 05:18 PM	#1441
Vinny Kreyling Registered Member Join Date: Nov 2002 Location: Miller Place, NY Posts: 7,206	Smocky, What sized tank & depth? __________________ 250 gallon mixed reef, 2 Reefbreeder's Photon V 2, Deepwater BLDC 12, DAS EX-3 Skimmer, MTC mini cal, 2-3/4" Sea Swirls, Aquacontroller & 6 Tunze pumps.

10/28/2016, 08:43 AM	#1429
xport Registered Member Join Date: Feb 2010 Location: west cost Norway Posts: 26	Yes the royal blue channel show up and it's posible to adjust , but does not light up on the pads. Regards Frode

10/28/2016, 08:47 AM	#1430
xport Registered Member Join Date: Feb 2010 Location: west cost Norway Posts: 26	The funny thing is that this 2 lamps are bought from to difrent people and the lamps have the same problem

12/30/2016, 05:40 PM	#1434
GCG Registered Member Join Date: Dec 2016 Posts: 1	Hi i'm new to the vertex illuminia club and have just got a 1200mm 260. I have 3 additional mixed pucks and 2 UV. Do any of you have a setup file I could have which could be used as a template? Thanks

01/04/2017, 10:06 AM	#1437
SilverHalide Registered Member Join Date: Sep 2013 Posts: 1	I have a SR260 that I just began using a few months ago. It was still in the box when Hurricane Sandy destroyed my old tank. It took me this long to get things started again. I am looking to purchase vertex illumina auxiliary modules. where can I buy these? I feel like I woke up from a four year coma when it comes to reefing.

01/04/2017, 03:57 PM	#1439
Smocky Registered Member Join Date: Sep 2015 Posts: 3	Hi guys. Sorry if i jump in the discussion with an usual question regarding the setting up of the Sr260, but it's months that i'm trying to set it without success. Could you kindly share some pictures of program in order to copy it in my configuration? I Want to have sps. Actually the light is positioned at 4" from the water. Thanks in advance and sorry to insert another issue have seen a lot of times. Rgs Antonio Inviato dal mio iPad utilizzando Tapatalk

01/04/2017, 04:00 PM	#1440
Smocky Registered Member Join Date: Sep 2015 Posts: 3	A precisation.. no multicolor pads are present in my lighting. Only the white, blue and royal blue Inviato dal mio iPad utilizzando Tapatalk

01/05/2017, 03:44 AM	#1442
Smocky Registered Member Join Date: Sep 2015 Posts: 3	Hi Vinny. My tank is 80 gallons. The depth is 21 ". Thanks for the help ! Inviato dal mio iPad utilizzando Tapatalk

01/11/2017, 01:12 PM	#1443
ClownBubbaJoe Registered Member Join Date: Nov 2013 Location: Nebraska Posts: 363	I need the cord and the software for a Vertex Illumina, where can I purchase them ? I tried this address, angd got to the website, but says it's under construction. vertex Industries, Huntington Beach, CA http://www.vertextechnologies.net Last edited by ClownBubbaJoe; 01/11/2017 at 01:18 PM.

01/11/2017, 02:36 PM	#1444
Hudds Registered Member Join Date: Feb 2013 Location: Greece Posts: 116	Try here http://www.vertexaquaristik.com __________________ Giorgos Thalassographia Reef

01/11/2017, 04:51 PM	#1445
ClownBubbaJoe Registered Member Join Date: Nov 2013 Location: Nebraska Posts: 363	I'll have to send the link to my office computer, as this tablet doesn't support plug in's ? Thanks !

01/11/2017, 05:05 PM	#1446
ClownBubbaJoe Registered Member Join Date: Nov 2013 Location: Nebraska Posts: 363	NI looked at a sticker on the light and reads,...600-200, and 00049E. So, which model is it ? SR200 ? I just clicked on the SR200 and all the others as well,...on the list, and it refresh's the page, but nothing happens ? Don't get it, but when the clicked on the pop-up, it revield the site anyway ? Computers !? Anyway, still confused on which model I have ? Last edited by ClownBubbaJoe; 01/11/2017 at 05:25 PM.

01/11/2017, 05:29 PM	#1447
Vinny Kreyling Registered Member Join Date: Nov 2002 Location: Miller Place, NY Posts: 7,206	ClownBubbaJoe, That phone # I listed above should get you to Adam & he is the rep in the area. Serial # & all other info can be found through the display on the end. __________________ 250 gallon mixed reef, 2 Reefbreeder's Photon V 2, Deepwater BLDC 12, DAS EX-3 Skimmer, MTC mini cal, 2-3/4" Sea Swirls, Aquacontroller & 6 Tunze pumps.

01/12/2017, 08:25 PM	#1448
5Starreef Registered Member Join Date: Oct 2009 Location: Mia, Florida Posts: 180	Looking for Vertex Illumina Owners in South Florida, please sent me pm , I am looking to borrow a Vertex VLink USB __________________ Natural Reef

01/16/2017, 06:46 AM	#1450
Pool Man Registered Member Join Date: Aug 2010 Location: Longview, Texas Posts: 27	Couple of questions hopefully someone will here will know. It appears one of my standard Blue/White pads went out on my 3ft SR360. #1 Are the pads the same on the SR260 as the SR360? Aside from the power output, I really don't know the difference. Is it a viable option? #2Does anyone have an extra they'd sell? PM me if you do!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vertex Skimmer club	JohnL	Lighting, Filtration & Other Equipment	2073	02/17/2020 11:59 AM
Vertex Illumina LED Arrives	TheDogFather	Lighting, Filtration & Other Equipment	251	06/27/2016 01:15 PM
Vertex Illumina V-link connection help!	Dyrego	Lighting, Filtration & Other Equipment	16	02/28/2013 10:08 AM
Vertex Illumina LED Fixture - My New Toy Is Here!	Jeremy B.	Premium Aquatics	77	08/12/2011 11:47 AM
Vertex Skimmer club	mojo~	Lighting, Filtration & Other Equipment	999	03/02/2009 02:49 PM