Proflix II updating

BadTiming · 04/02/2020, 12:09 PM

Hey,

Getting back into the hobby so I'm trying to save some bucks and i'm trying to update my Proflix II from v4.0.6 to v4.0.8. I did try the v4.0.8.1 from the GHL site but couldn't find the hmx file. From there I should be able to get in the v5's loaded. Finally found someone who had the v4.0.8 hmx file. When I tried to load it I get a "Error while transmitting firmware"

Any help would be appreciated then I can use the GHL firmware site.

Thanks,
Kevin

reefwiser · 04/02/2020, 01:08 PM

All firmware for GHL are in the latest version of GCC. There are no separate files. Which GCC have you downloaded.

BadTiming · 04/02/2020, 01:51 PM

I have downloaded from here https://www.aquariumcomputer.com/dow...ol-iiv4-0-8-1/

reefwiser · 04/02/2020, 06:02 PM

What app are you using to install the firmware. The old GCC app?

BadTiming · 04/03/2020, 06:55 AM

Hi and yes the old GCC the new center doesn't support the Profilux II

reefwiser · 04/03/2020, 12:13 PM

The one problem is the USB driver. Always check what port that windows has assigned a different com port. Than what you have assigned in the GCC.

BadTiming · 04/03/2020, 12:35 PM

Profilux II does not have USB, DB9 cable or cat 5

04/02/2020, 12:09 PM	#1
BadTiming Registered Member Join Date: Feb 2010 Location: Ottawa, Canada Posts: 17	Proflix II updating Hey, Getting back into the hobby so I'm trying to save some bucks and i'm trying to update my Proflix II from v4.0.6 to v4.0.8. I did try the v4.0.8.1 from the GHL site but couldn't find the hmx file. From there I should be able to get in the v5's loaded. Finally found someone who had the v4.0.8 hmx file. When I tried to load it I get a "Error while transmitting firmware" Any help would be appreciated then I can use the GHL firmware site. Thanks, Kevin

04/02/2020, 01:08 PM	#2
reefwiser Registered Member Join Date: Nov 2013 Location: Louisville,Kentucky Posts: 1,208	All firmware for GHL are in the latest version of GCC. There are no separate files. Which GCC have you downloaded. __________________ President Louisville Marine Aquarium Society. http://www.lmas.org/ The 3rd Annual Frag swap will be held September 23rd,2017 11 am till 3pm Saint Thomas Fellowship hall,9616 Westport Road,Louisvi

04/02/2020, 06:02 PM	#4
reefwiser Registered Member Join Date: Nov 2013 Location: Louisville,Kentucky Posts: 1,208	What app are you using to install the firmware. The old GCC app? __________________ President Louisville Marine Aquarium Society. http://www.lmas.org/ The 3rd Annual Frag swap will be held September 23rd,2017 11 am till 3pm Saint Thomas Fellowship hall,9616 Westport Road,Louisvi

04/03/2020, 12:13 PM	#6
reefwiser Registered Member Join Date: Nov 2013 Location: Louisville,Kentucky Posts: 1,208	The one problem is the USB driver. Always check what port that windows has assigned a different com port. Than what you have assigned in the GCC. __________________ President Louisville Marine Aquarium Society. http://www.lmas.org/ The 3rd Annual Frag swap will be held September 23rd,2017 11 am till 3pm Saint Thomas Fellowship hall,9616 Westport Road,Louisvi

04/02/2020, 01:51 PM	#3
BadTiming Registered Member Join Date: Feb 2010 Location: Ottawa, Canada Posts: 17	I have downloaded from here https://www.aquariumcomputer.com/dow...ol-iiv4-0-8-1/

04/03/2020, 06:55 AM	#5
BadTiming Registered Member Join Date: Feb 2010 Location: Ottawa, Canada Posts: 17	Hi and yes the old GCC the new center doesn't support the Profilux II

04/03/2020, 12:35 PM	#7
BadTiming Registered Member Join Date: Feb 2010 Location: Ottawa, Canada Posts: 17	Profilux II does not have USB, DB9 cable or cat 5