10 gallon tank with CPR HOB fuge

alfred14 · 01/27/2019, 11:46 PM

My HOB is a little to big. My wife says it looks bad. I need advice on making my aquarium more presentable as well as how to better plum everything.

I currently have a 10 gallon tank with a HOB Refugium from Craig’s list. Looks like a cpr fuge with the skimmer. It’s has a pump with it that has a needle wheel and hoses to increases O2 flow. Pics will go up tomorrow morning hopefully.
My two main things are better return plumbing and ways to cover up the current visual negativities (HOB is bigger than the aquarium)
Thank you for yalls help

Sent from my iPhone using Tapatalk

mann1139 · 01/29/2019, 10:55 AM

For visuals, you can buy pieces of acrylic off Amazon and cut to fit.

Just make sure you get an adhesive designed for acrylic.

alfred14 · 02/02/2019, 11:09 PM

The last picture of the return flow is my main problem. I need a better system but need to findout where I can get pipe that fits.
I also need to find a lower power pinwheel pump for the skimmer.

Sent from my iPhone using Tapatalk

Rhett 1 · 02/07/2019, 03:17 PM

If a sump is out of the question, you could consider an all in one tank. An option that would be cheep and effective with your current set up would be painting the front of the acrylic black to match the tank back glass.

Forgiven1973 · 02/11/2019, 04:28 PM

If u decide to sell ur HOB fuge lmk and if price is right I might be interested

geekengineer · 02/11/2019, 11:46 PM

I actually started out with a 10 gal not knowing at the time that was pretty difficult to pull of for reef tanks.. I ended up needing a skimmer of course. So I custom designing and 3D printing a HOB skimmer that really fit the whole setup well. That was way too much effort for what it was worth, but it was cool to get it working. Anyways, could you rearrange things and put a refuge/sump underneath a cabinet stand somehow?

alfred14 · 02/24/2019, 09:22 PM

Due to the BOSS (wife), I am currently only allowed that ten gallons on that book shelf. Trying to think of ways to hide or make more aesthetic the HOB Refugium. I think it will work great as a one to two fish setup with some easy corals. Would like to use it as a quarantine tank in 1-2 years. It holds around 3 gallons I believe.
I just added a baffle to cut back on backflow during power outages. Was having to run it at almost three inches below the rim.
My next step is some cleaners.

Current idea is two clowns with some cleaner crew. Then add corals only easy stuff.

Sent from my iPhone using Tapatalk

mcgyvr · 02/25/2019, 11:25 AM

Just ditch the HOB fuge..
It is 100% optional just like a skimmer..
A 10G tank can easily be managed by small water changes alone and only have a powerhead in the tank for circulation and not need anything else..

alfred14 · 02/25/2019, 11:55 AM

Right but my thought is an add 30% water volume decreases the need for water changes. I need low maintenance. I will probably only work on it 2-3 days a month max. And for ten to fifteen minutes.

Sent from my iPhone using Tapatalk

alfred14 · 02/25/2019, 11:57 AM

I wanted a 90 plus gallon tank so I could have 4-5 small fish with some corals. Would like to be on the berry low level when it comes to stocking making water changes minimal to none.

Sent from my iPhone using Tapatalk

01/27/2019, 11:46 PM	#1
alfred14 Registered Member Join Date: Mar 2013 Posts: 37	10 gallon tank with CPR HOB fuge My HOB is a little to big. My wife says it looks bad. I need advice on making my aquarium more presentable as well as how to better plum everything. I currently have a 10 gallon tank with a HOB Refugium from Craig’s list. Looks like a cpr fuge with the skimmer. It’s has a pump with it that has a needle wheel and hoses to increases O2 flow. Pics will go up tomorrow morning hopefully. My two main things are better return plumbing and ways to cover up the current visual negativities (HOB is bigger than the aquarium) Thank you for yalls help Sent from my iPhone using Tapatalk

02/07/2019, 03:17 PM	#4
Rhett 1 Registered Member Join Date: Nov 2010 Location: Dallas Posts: 15	If a sump is out of the question, you could consider an all in one tank. An option that would be cheep and effective with your current set up would be painting the front of the acrylic black to match the tank back glass. __________________ You dont need a parchute to sky dive you olny need one to skydive twice.

02/11/2019, 11:46 PM	#6
geekengineer Registered Member Join Date: Aug 2015 Location: colorado Posts: 638	I actually started out with a 10 gal not knowing at the time that was pretty difficult to pull of for reef tanks.. I ended up needing a skimmer of course. So I custom designing and 3D printing a HOB skimmer that really fit the whole setup well. That was way too much effort for what it was worth, but it was cool to get it working. Anyways, could you rearrange things and put a refuge/sump underneath a cabinet stand somehow? __________________ Come back from the dead. Not sure what I'm doing at this time.. have a 30 Gallon DT and 20 Sump sitting in mothballs. Other interests DYI, 3D printing, Current Tank Info: 30 gal saltwater and 20 gal sump

02/25/2019, 11:25 AM	#8
mcgyvr Registered Member Join Date: Sep 2003 Location: North Carolina Posts: 20,050	Just ditch the HOB fuge.. It is 100% optional just like a skimmer.. A 10G tank can easily be managed by small water changes alone and only have a powerhead in the tank for circulation and not need anything else.. __________________ Who me?

01/29/2019, 10:55 AM	#2
mann1139 Registered Member Join Date: Dec 2007 Location: Jersey Posts: 178	For visuals, you can buy pieces of acrylic off Amazon and cut to fit. Just make sure you get an adhesive designed for acrylic.

02/02/2019, 11:09 PM	#3
alfred14 Registered Member Join Date: Mar 2013 Posts: 37	The last picture of the return flow is my main problem. I need a better system but need to findout where I can get pipe that fits. I also need to find a lower power pinwheel pump for the skimmer. Sent from my iPhone using Tapatalk

02/11/2019, 04:28 PM	#5
Forgiven1973 Registered Member Join Date: Nov 2010 Location: Between Bellevue & Columbus, OH Posts: 719	If u decide to sell ur HOB fuge lmk and if price is right I might be interested

02/24/2019, 09:22 PM	#7
alfred14 Registered Member Join Date: Mar 2013 Posts: 37	Due to the BOSS (wife), I am currently only allowed that ten gallons on that book shelf. Trying to think of ways to hide or make more aesthetic the HOB Refugium. I think it will work great as a one to two fish setup with some easy corals. Would like to use it as a quarantine tank in 1-2 years. It holds around 3 gallons I believe. I just added a baffle to cut back on backflow during power outages. Was having to run it at almost three inches below the rim. My next step is some cleaners. Current idea is two clowns with some cleaner crew. Then add corals only easy stuff. Sent from my iPhone using Tapatalk

02/25/2019, 11:55 AM	#9
alfred14 Registered Member Join Date: Mar 2013 Posts: 37	Right but my thought is an add 30% water volume decreases the need for water changes. I need low maintenance. I will probably only work on it 2-3 days a month max. And for ten to fifteen minutes. Sent from my iPhone using Tapatalk

02/25/2019, 11:57 AM	#10
alfred14 Registered Member Join Date: Mar 2013 Posts: 37	I wanted a 90 plus gallon tank so I could have 4-5 small fish with some corals. Would like to be on the berry low level when it comes to stocking making water changes minimal to none. Sent from my iPhone using Tapatalk