|
03/22/2019, 08:10 PM | #1 |
Registered Member
Join Date: Aug 2010
Location: Michigan
Posts: 15
|
Sealing the bottom of baffle question
I have done a lot of reading but found little on my question. When installing glass baffles do I need to put spacers under the baffles so I can get a bead of silicone between the bottom of the baffle and the bottom of the sump? I know about leaving 1/8” on the sides so I would assume this holds true for the bottom as well? If you do have a spacer, at some point I would pull it out and fill in the gap right?
Thanks for your help. |
03/23/2019, 06:33 AM | #2 |
Registered Member
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
|
Usually the baffles are raised up slightly from sitting on the existing silicone around the bottom of the tank.
If thats not happening then simply run a bead and set the baffle in it..
__________________
Who me? |
Thread Tools | |
|
|