|
12/29/2017, 10:56 PM | #1 |
Registered Member
Join Date: Apr 2008
Location: boston
Posts: 58
|
Ongoing dKh problems, 20 gallon Nuvo
Hey Everyone,
I bought my Nuvo Fusion fully stocked in March of this year. Since I bought it, I haven't been able to consistently keep my dHh over 5.0 (I know.) My Ca is also on the low end, and Mg is adequate. I'll update with specific numbers tomorrow; just did a water change tonight. I'll also throw in some pics Here are the details: Tank: 20 gallon Nuvo Fusion - Running a Ghost skimmer - Using IM filter media in the two HOB filters - Running two Kessil A80 lights - Tunze ATO Livestock - One oscellaris clown - One Pajama cardinal - One sapphire damsel - One watchman goby - One pistol shrimp - One fire shrimp - Huge birdsnest SPS (doing great) - Two other smaller SPS frags - Very large leather - Multiple zoas, mushrooms, other softies Maintenance: - 3-4 gallon water change q7-10 days. LFS water, used to be RPM, but has recently been Kent. RPM wasn't holding alkilinity, so at first I thought that was my problem. Clearly there's something else going on. The water is never over 4-5 weeks sitting in a bucket, max. The Kent holds its alk well during that time. - 2 part dosing with Reef Code A & B, always dosed 10 minutes apart minimum. I dose with each water change and I've tried dosing daily to very little avail I've bought new Reef Code, new test kits, taken my water to the LFS . . . No one has any idea why I can't get and keep my alk up. I can get it to 6.5 right after a water change, but it invariably drops within a few days, despite dosing. I'm not a novice reef keeper, and I'm close to my wit's end. I'm going to try switching to Seachem's 2 part dosing to see if that helps, and my LFS also suggested a complete water change using some of their cycled water. Any other thoughts? Cross posted in the Nano Aquarium group |
12/29/2017, 11:47 PM | #2 |
RC Mod
Join Date: Mar 2002
Location: Mountain View, CA, USA
Posts: 88,616
|
A lot of tanks go through 2-3 dKH per day. My soft coral tanks did, for example. There was a lot of coralline growth involved. I suspect that you are seeing normal consumption, but we'd need to get a few days or more of data on the subject.
For now, you could use baking soda to dose alkalinity, since I don't know the concentration of that 2-part. Just dissolve the baking soda in a bit of water and dose. This calculator might help: http://reef.diesyst.com/chemcalc/chemcalc.html It requires a guess as to the actual water volume of your system. I'd suggest dosing 1 dKH as a target, and measuring the alkalinity level a minute or so after dosing. A few doses should get you a reasonable estimate as to the total water volume. You can increase the dose to 2 dKH when you're getting closer. Once you have the water volume estimate under control, we can start to work on the alkalinity consumption. I'd dose the tank to 8 dKH, and then measure the level 12 and 24 hours later.
__________________
Jonathan Bertoni |
12/30/2017, 10:12 AM | #3 |
Registered Member
Join Date: Apr 2002
Posts: 1,076
|
I used kalk for all my ATO water on my Red Sea Reefer Nano (21gal) which was 90% SPS with a large clam. Maintained levels fairly well with very little maintenance.
|
01/01/2018, 10:01 PM | #4 |
Registered Member
Join Date: Sep 2017
Location: Redwood City
Posts: 1,354
|
Sounds like you need to up your dosing.
Can you delete your other post that is exactly the same as this????? Cheers! Mark
__________________
2x 65g displays with a 30g cryptic refugium and 30g sump - 55g reef 30g Bio-cube reef - I.M. 30g reef - 45g freshwater |
Thread Tools | |
|
|