Fragging 101 I Cup Coral (Turbinaria)

mikejrice · 10/27/2018, 10:16 PM

https://youtu.be/lJFiQj3VkDY

Methodology:

The method I use for fragging the majority of hard corals is primarily the same with the cutting tooling being an Inland band saw.

Cooling liquid used is fresh mixed saltwater with enough iodine to color it a light amber. This helps to disinfect cuts as they're made which has shown to greatly increase frag survival.

All corals are stored during cutting in a small bucket holding water taken directly from their home aquarium. This water is used both to keep them wet as well as for rinsing any flesh away from cuts while I'm working on them.

All finished, and rinsed, frags or trimmed colonies are soaked in Brightwell Aquatics Restor dip to insure that minimal flesh is lost.

Both soak buckets are rinsed and replenished between colonies to reduce the risk of interactions between loose flesh of different coral species.

Notes about Cup Coral (Turbinaria):

Cup coral has one of the softest of hard coral skeletons which makes it easy to cut with just about any high-speed abrasive cutters.

Due to it's toadstool-like shape, it can easily be fragged by removing a halo from around it's outer perimeter which can then be segmented into smaller frags. This produces a large number of frags while preserving the original growth form of the colony.

As with all LPS corals, survival and growth rate after fragging can be greatly increased by avoiding as many polyps as possible while cutting.

Subscribe for videos every Thursday:
http://www.youtube.com/subscription_...ser=mikejrice1

http://www.elitereef.com
https://www.facebook.com/pages/Elite-Reef/233504278468
https://twitter.com/elitereef
http://www.captivecoral.net
http://www.fragging101.wordpress.com

Sent from my SM-G920P using Tapatalk

10/27/2018, 10:16 PM	#1
mikejrice Registered Member Join Date: Jul 2009 Location: Denver, Colorado Posts: 278	Fragging 101 I Cup Coral (Turbinaria) https://youtu.be/lJFiQj3VkDY Methodology: The method I use for fragging the majority of hard corals is primarily the same with the cutting tooling being an Inland band saw. Cooling liquid used is fresh mixed saltwater with enough iodine to color it a light amber. This helps to disinfect cuts as they're made which has shown to greatly increase frag survival. All corals are stored during cutting in a small bucket holding water taken directly from their home aquarium. This water is used both to keep them wet as well as for rinsing any flesh away from cuts while I'm working on them. All finished, and rinsed, frags or trimmed colonies are soaked in Brightwell Aquatics Restor dip to insure that minimal flesh is lost. Both soak buckets are rinsed and replenished between colonies to reduce the risk of interactions between loose flesh of different coral species. Notes about Cup Coral (Turbinaria): Cup coral has one of the softest of hard coral skeletons which makes it easy to cut with just about any high-speed abrasive cutters. Due to it's toadstool-like shape, it can easily be fragged by removing a halo from around it's outer perimeter which can then be segmented into smaller frags. This produces a large number of frags while preserving the original growth form of the colony. As with all LPS corals, survival and growth rate after fragging can be greatly increased by avoiding as many polyps as possible while cutting. Subscribe for videos every Thursday: http://www.youtube.com/subscription_...ser=mikejrice1 http://www.elitereef.com https://www.facebook.com/pages/Elite-Reef/233504278468 https://twitter.com/elitereef http://www.captivecoral.net http://www.fragging101.wordpress.com Sent from my SM-G920P using Tapatalk