Corona RapidLed Lighting Schedules

RussWalters · 07/07/2017, 12:29 PM

I've been using the Corona RapidLed for 8 months or so and really like them, however I would like to revisit my initial color profile that I built. Is anyone else using this lighting and able to share their color profile? I'd love to see what everyone else is using.

acorral · 07/09/2017, 06:05 AM

Quote:

Originally Posted by RussWalters

I've been using the Corona RapidLed for 8 months or so and really like them, however I would like to revisit my initial color profile that I built. Is anyone else using this lighting and able to share their color profile? I'd love to see what everyone else is using.

Practically all channels to 100% except white to 95%

RussWalters · 07/09/2017, 12:44 PM

Thanks for sharing!

Wow and you're running it for 12 hours a day? That seems like a lot of output. Seeing good results?

Cheapreef · 07/09/2017, 12:57 PM

Quote:

Originally Posted by acorral

Practically all channels to 100% except white to 95%

Are they that low output that you run them that high or do you have them mounted really high off your tank? Any PAR numbers at those levels? Seems like they should put out a fair amount of light, maybe not.

acorral · 07/09/2017, 02:24 PM

Quote:

Originally Posted by Cheapreef

Are they that low output that you run them that high or do you have them mounted really high off your tank? Any PAR numbers at those levels? Seems like they should put out a fair amount of light, maybe not.

Have them far from the surface to have better blending and access:

5" below surface I have 400 PAR, 100 at the bottom 25" below

Cheapreef · 07/09/2017, 03:07 PM

Quote:

Originally Posted by acorral

Have them far from the surface to have better blending and access:

5" below surface I have 400 PAR, 100 at the bottom 25" below

Ah good info they are a little on the low side for par then.

acorral · 07/09/2017, 03:24 PM

Quote:

Originally Posted by Cheapreef

Ah good info they are a little on the low side for par then.

Measured them side by side with radion xr30w and they were almost identical

yachtdr22 · 07/19/2017, 09:02 PM

Question:
I have a 125 mixed reef with 3) Onyx fixtures. 1 has died.
Dilemma; find some used Onyx or upgrade the 1 to the Corona.

any thoughts?

thanks
Drew

acorral · 07/21/2017, 09:16 AM

Quote:

Originally Posted by yachtdr22

Question:
I have a 125 mixed reef with 3) Onyx fixtures. 1 has died.
Dilemma; find some used Onyx or upgrade the 1 to the Corona.

any thoughts?

thanks
Drew

I have 2 onyx on my QT and hate the disco ball effect, on the corona is way less so i would change to corona

07/07/2017, 12:29 PM	#1
RussWalters Registered Member Join Date: Jun 2016 Location: Atlanta, GA Posts: 71	Corona RapidLed Lighting Schedules I've been using the Corona RapidLed for 8 months or so and really like them, however I would like to revisit my initial color profile that I built. Is anyone else using this lighting and able to share their color profile? I'd love to see what everyone else is using.

07/19/2017, 09:02 PM	#8
yachtdr22 Registered Member Join Date: Mar 2002 Location: corpus christi, tx Posts: 488	Question: I have a 125 mixed reef with 3) Onyx fixtures. 1 has died. Dilemma; find some used Onyx or upgrade the 1 to the Corona. any thoughts? thanks Drew __________________ 125 FOLR, 30 gal sump w/LR, SWC 16

07/09/2017, 12:44 PM	#3
RussWalters Registered Member Join Date: Jun 2016 Location: Atlanta, GA Posts: 71	Thanks for sharing! Wow and you're running it for 12 hours a day? That seems like a lot of output. Seeing good results?