|
01/13/2018, 08:49 PM | #1 |
Registered Member
Join Date: Jul 2013
Location: Sacrameto, California
Posts: 168
|
Frag placement
About to glue a few frags down
Anyone have recommendations on good placement for Acans Chalice Torch Monti Frog & hammer Toadstool & devils hand Going to keep the torch/frogspawn/hammer on one side of the tank and the rest on the others Torch has three heads and long tentacles Sent from my iPhone using Tapatalk |
01/15/2018, 11:20 AM | #2 |
Registered Member
Join Date: Mar 2015
Posts: 155
|
Acan, chalice at the base.
Torch, frog, hammer, toadstool in the upper middle. Devil is lower middle. Monti is high up. Sent from my iPhone using Tapatalk Pro |
01/16/2018, 10:09 AM | #3 |
Registered Member
Join Date: Oct 2013
Location: 33612
Posts: 2,461
|
I always use the guide below. It is simple to follow and so far very accurate in my experience.
Coral Placement Link
__________________
32 gallon Biocube, DIY LEDs and Triton Method. My N=1 study of me, validated by me, and supported by completely anecdotal evidence, states that my advice is 100% correct, most of the time. |
01/17/2018, 01:05 PM | #4 |
Registered Member
Join Date: Aug 2001
Location: Vestal, NY
Posts: 3,679
|
IMO, don't glue them until you know they are happy where they are.
__________________
Jackson - All advice I give is based on my first hand experience. YMMV. Current Tank Info: 38g (mostly LPS) with a 20g sump/fuge and all the other standard goodies |
01/17/2018, 01:27 PM | #5 |
Registered Member
Join Date: Jul 2004
Location: Georgetown, TX
Posts: 1,122
|
Placement can be dependent on flow and lighting as well. I usually put Euhphyllia on bottom or lower/mid areas. What kind of lights are you running?
__________________
Josh Current Tank Info: 90g mixed reef w/ 55g sump/fuge. |
01/20/2018, 11:14 PM | #6 |
Registered Member
Join Date: Jul 2013
Location: Sacrameto, California
Posts: 168
|
|
Thread Tools | |
|
|