|
11/08/2018, 11:10 PM | #1 |
Registered Member
Join Date: Jun 2017
Posts: 80
|
pm3 bullet
was given a pm bullet 3 skimmer free i want to hook up in a large sump anyone have any videos or how to and is there a cheaper pump then mag36 that us big enough ?
__________________
Nick I Sports Rings One S.I. N.Y. |
11/08/2018, 11:52 PM | #2 |
Registered Member
Join Date: Jan 2006
Location: Westminster, CO
Posts: 17,289
|
I wouldn't use a mag 36. If I were running that skimmer the pump of choice would be an Iwaki MD55RLT. Great skimmer I might add.
__________________
Hobby Experience: 9200ish gallons, 26 skimmers, and a handful of Kent Scrapers. Current Tank: Vortech Powered 600G SPS Tank w/ 100gal frag tank & 100g Sump. RK2-RK10 Skimmer. ReefAngel. Radium 20k. |
11/11/2018, 01:39 AM | #3 |
Registered Member
Join Date: Jun 2017
Posts: 80
|
thank u do you know of a submersible pump i want to run in sump
__________________
Nick I Sports Rings One S.I. N.Y. |
11/13/2018, 11:44 PM | #4 |
Registered Member
Join Date: Jan 2006
Location: Westminster, CO
Posts: 17,289
|
What size tank? An internal pump that size is going to add considerable heat to the system.
__________________
Hobby Experience: 9200ish gallons, 26 skimmers, and a handful of Kent Scrapers. Current Tank: Vortech Powered 600G SPS Tank w/ 100gal frag tank & 100g Sump. RK2-RK10 Skimmer. ReefAngel. Radium 20k. |
11/14/2018, 06:06 AM | #5 |
Registered Member
Join Date: Jun 2017
Posts: 80
|
120 gallon i have 2 pumps now for tank and im using a larhe 4ft sump can i put a submersible in there and smimmer in sump as well
__________________
Nick I Sports Rings One S.I. N.Y. |
04/11/2020, 05:30 AM | #6 |
Registered Member
Join Date: Apr 2019
Posts: 12
|
Use a external big pump only minimum iwaki 55
On the site they have a flow chart for pm2-3 |
Thread Tools | |
|
|