|
06/24/2015, 07:07 PM | #1 |
Registered Member
Join Date: May 2011
Location: Southern California
Posts: 2,569
|
FS: Gyre XF150
Tried it out for a few months, ran it on the lowest setting. I have 2 mp60s, so i decided I didn't need this much flow in my tank. Works same as new, I have the original box and all the stuff that came with it.
Asking $260 Paid $300+ tax from marine depot. Still under warranty. Located in corona 92880 Please don't low ball me, if it doesn't sell here, I'll post it on the main forum and ship it. Thanks for looking Last edited by SchnitzelReef; 06/24/2015 at 07:23 PM. |
06/24/2015, 08:56 PM | #2 |
Registered Member
Join Date: May 2014
Location: 92833
Posts: 1,099
|
Ask your corals they probably liked the jacuzzi affect I'm surprised anyone would sale one off. I'm going to purchase one soon for my 90g but I already have a closed loop pump plus the main pump so I'm going to get the small one. GLWS
|
06/24/2015, 09:03 PM | #3 |
Registered Member
Join Date: Oct 2012
Location: DFW,Area
Posts: 798
|
I have an in wall 180 with a MP 60 on one end and two MP 40's across from it. I am bare bottom and still get a lot of stuff on the bottom so I was just looking at one of these in the LFS less than an hour ago. I to am surprised to see it up for sale but best of luck to you.
|
06/25/2015, 09:36 AM | #4 |
Registered Member
Join Date: May 2011
Location: Southern California
Posts: 2,569
|
There's nothing wrong with the pump, I just decided to stick with my MP60s.
|
06/25/2015, 06:00 PM | #5 |
Registered Member
Join Date: Oct 2008
Location: 91342 Sylmar,Ca
Posts: 435
|
Did you ever add the silencer mount. THey are $10 + free shipping on coral vue.
|
06/25/2015, 07:42 PM | #6 |
Registered Member
Join Date: May 2011
Location: Southern California
Posts: 2,569
|
|
06/26/2015, 12:05 PM | #7 |
Registered Member
Join Date: May 2011
Location: Southern California
Posts: 2,569
|
Bump for the weekend
|
06/27/2015, 09:37 AM | #8 |
Registered Member
Join Date: May 2011
Location: Southern California
Posts: 2,569
|
$240 for the weekend
|
06/29/2015, 06:35 PM | #9 |
Registered Member
Join Date: May 2011
Location: Southern California
Posts: 2,569
|
If anyone was interested, I contacted Coralvue and they are shipping me a brand new motor for the gyre. Apparently there is an issue with the wire cracking/splitting. They say the new motor has a thicker casing around the wire and will not crack. So give me a couple days and I'll have a brand new gyre motor included with this sale. Thanks
|
07/03/2015, 09:22 AM | #10 |
Registered Member
Join Date: May 2011
Location: Southern California
Posts: 2,569
|
|
07/03/2015, 12:14 PM | #11 | |
Registered Member
Join Date: Jan 2009
Location: Palmdale
Posts: 2,556
|
Quote:
__________________
~SFVR Member~ 125 Gal Long/50 Gal sump, 2xMP40QD,Aquamax CONES CO-03/Speed Wave dc return 4x AI Sol Blues/Director + 2 80w T5 retrofit/Apex Controller Current Tank Info: 125 gal 72X18X22 |
|
07/03/2015, 12:18 PM | #12 |
Registered Member
Join Date: May 2011
Location: Southern California
Posts: 2,569
|
Because I had some people tell me that there was some issues with the original gyre. I emailed Coralvue and sent them proof of purchase and a pic of the motor. They said they would send me a new motor and a new controller. They said the new casing/insulation on the wire is thicker and won't crack like the original one. |
07/03/2015, 12:21 PM | #13 | |
Registered Member
Join Date: Jan 2009
Location: Palmdale
Posts: 2,556
|
Quote:
__________________
~SFVR Member~ 125 Gal Long/50 Gal sump, 2xMP40QD,Aquamax CONES CO-03/Speed Wave dc return 4x AI Sol Blues/Director + 2 80w T5 retrofit/Apex Controller Current Tank Info: 125 gal 72X18X22 |
|
07/06/2015, 11:02 AM | #14 |
Registered Member
Join Date: May 2011
Location: Southern California
Posts: 2,569
|
FS: Gyre XF150
Bump. If your local, I can ship it for free and it usually gets there next day
|
07/07/2015, 09:19 AM | #15 |
Registered Member
Join Date: May 2011
Location: Southern California
Posts: 2,569
|
Sold
|
|
|