|
01/05/2018, 12:31 AM | #1 |
Registered Member
Join Date: Sep 2003
Posts: 78
|
Setting up a Vectra L1
Hi there, I can’t seem to find the info I’m after, I’m setting my L1 up, do I set up the pump to 100% via ecotech live then calibrate to suit my aquarium, or set it up to the correct levels via eco live then calibrate it to 100% output? Or something else? Many thanks
|
01/05/2018, 09:14 AM | #2 |
Registered Member
Join Date: Apr 2002
Location: Olympia. WA.
Posts: 8,648
|
When I got my Vectras, I plumbed them in, then plugged them in, set the flow program, and turned the dial on the controller to the speed I wanted them to operate at. Nothing else.
__________________
240 gallon soft coral tank 50 gallon lps tank |
01/05/2018, 10:19 PM | #3 |
Registered Member
Join Date: Sep 2003
Posts: 78
|
Hi Mfinn, thanks for the reply, i want to use the feed function without having to turn the pump off, so need to calibrate it, plus i think its a useful feature!
|
01/06/2018, 09:54 AM | #4 | |
Registered Member
Join Date: Apr 2002
Location: Olympia. WA.
Posts: 8,648
|
Quote:
Give that a try.
__________________
240 gallon soft coral tank 50 gallon lps tank |
|
01/08/2018, 11:42 AM | #5 |
Registered Member
Join Date: Sep 2003
Posts: 78
|
Hi, I’ve not got a problem calibrating, I’m after in which order, do I set the level for the pump in esl then calibrate or set it up at 100% the n esl then calibrate thanks though
|
Thread Tools | |
|
|