|
|
|
07/15/2018, 07:40 AM
|
#1 |
|
Registered Member
Join Date: Aug 2009
Posts: 9
|
Tank Stand Design 120gal
Hi All,
I am planning my design for my 120 gal (2'x2'x4') reef tank. I plan on doing a walnut stand build with two-tone stain. I was wondering if this frame design would be sufficient to support a tank and hood. My main concern would be using no center vertical supports on the front and rear. From my research, I was able to gather that would be okay, so long as I used 2x6's for the horizontal frame on the top. My main reason for doing this is I would like to leave the front open for a removable panel on the front of the stand. Thank you all! R/ |
|
|
|
07/15/2018, 08:45 AM
|
#2 |
|
Registered Member
Join Date: Nov 2005
Location: San Diego, CA
Posts: 14,655
|
That looks fine
__________________
There's a fine line between owning your tank and your tank owning you! Current Tank Info: SCA 120g RR Starfire, Tunze silence 1073.02 return, 40g sump w/ fuge, SWC Extreme 160 cone skimmer,Geismann reflexx 4xT5, 2x Panorama Pro LED strips, Vortech MP40QD |
|
|
|
|
07/15/2018, 07:52 PM
|
#3 |
|
Registered Member
Join Date: May 2018
Location: Imperial, mo
Posts: 95
|
Using 2x6 you should be able to span a 3.5 foot gap with 0 problems. Your design looks to be pretty standard. My 90 is exactly the same, only 18 deep and I didn't use a center support and had no issues. I'm pretty sure I could stack another tank on it and still be fine lol.
|
|
|
|
|
07/15/2018, 07:57 PM
|
#4 |
|
Registered Member
Join Date: May 2018
Location: Imperial, mo
Posts: 95
|
Apparently I forgot to add this...
|
|
|
|
|
07/15/2018, 08:40 PM
|
#5 |
|
Registered Member
Join Date: Aug 2011
Posts: 29
|
looks great should not have any problems
|
|
|
|
|
07/16/2018, 06:17 AM
|
#6 |
|
Registered Member
 
Join Date: Apr 2008
Location: Grove City, Ohio
Posts: 10,806
|
IMHO, it will be fine even using 2x4's for the top frame. I assume you will be skinning it with something? That will add considerable strength to the stand as well.
__________________
I'll try to be nice if you try to be smarter! I can't help that I grow older, but you can't make me grow up! Current Tank Info: 120 mixed reef with 40b sump, RO 150 skimmer, AI Sol Blue x 2, and a 60g Frag Tank with 100g rubbermaid sump. 2 x Kessil A360w lights, BM curve 5 skimmer |
|
|
|
|
07/16/2018, 09:25 AM
|
#7 |
|
Registered Member
Join Date: Sep 2003
Location: North Carolina
Posts: 20,050
|
Could easily just be done with 3/4" plywood too and no "studs"..if you want to optimize space..
__________________
Who me? |
|
|
|
|
07/16/2018, 11:16 PM
|
#8 |
|
Registered Member
Join Date: Aug 2009
Posts: 9
|
Thanks for the responses and suggestions.
Definitely giving me something to think about. My plan is to build it with walnut with a two-tone stain on the outside. I'm working with a local carpenter to work out the details. R/ |
|
|
|
|
07/22/2018, 04:00 PM
|
#9 | |
|
Registered Member
Join Date: Apr 2008
Location: Indianapolis
Posts: 2,447
|
Quote:
__________________
120g DT 100lbs LR / 200 lbs LS, 45g fuge, VectraM1 Return, Herbie drain, 4x RW-8, 2x AI Hydra 26 w AWM, ASM G2, Apex controller, Apex BoB w floats ATO |
|
|
|
|
 |
| Thread Tools | |
|
|
