|
03/13/2013, 04:31 PM | #1 |
TDS Addict Extraordinaire
Join Date: Mar 2000
Location: Brooklyn, NY
Posts: 307
|
ATO with float switch backup
Can you change the level at which the pressure sensor triggers? I have the float switch backup and even adjusted all the way it still is not enough to trip the sensor without the float backup being partially submerged (needs a bit over 3 inches until it works)... I saw on the youtube video from avast that the pressure switch in the demo seemed to trigger at a shallower depth.... can I change that?
Last edited by Dr_zilla; 03/13/2013 at 04:48 PM. Reason: clarity |
|
|