|
12/23/2019, 03:16 PM | #4151 | |
Registered Member
Join Date: Dec 2012
Posts: 95
|
Quote:
Thanks for the advise Fortunately my issue was resolved by the guys at ATi. Unfortunately i needed to buy a new controller. Sent from my iPhone using Tapatalk
__________________
I dont have a gun license .... but i got my permit |
|
01/10/2020, 02:43 AM | #4152 |
Registered Member
Join Date: Aug 2016
Location: 562, CA
Posts: 467
|
Does anyone have a recommended schedule for this light?
|
01/12/2020, 04:35 AM | #4153 |
Registered Member
Join Date: Jun 2006
Location: Mackay Queensland, Australia
Posts: 195
|
I have an 8 bulb unit and one of the pairs of T5’s doesn’t light when the unit starts up each day. If I twist one of the bulbs just a touch the two lights light up and stay on all day without any issues. This I a little painful. I am guessing that the ballast is OK as the bulbs stay on. My question is what is the likely fault. Is it the bulb (I’m assuming it is one of them that is causing the pair to fail to start) or is it the bulb fitting.
Thanks
__________________
Cheers Marc Current Tank Info: 7x3x2 Reef Tank |
01/12/2020, 08:29 PM | #4154 | |
Registered Member
Join Date: Aug 2016
Location: 562, CA
Posts: 467
|
Quote:
|
|
03/04/2020, 12:20 PM | #4155 |
Registered Member
Join Date: Feb 2014
Location: Glan-Münchweiler Germany
Posts: 203
|
I’m really contemplating a Hybrid Powermodule for my RSR 425 (47”x22.6”x22”) lxwxh.
The three Reef 90s are way too blue and the coral’s Yellows, Reds and Purples are weak. I get bare spots on the undersides of my corals. In regards to those dimensions, would the 6 bulb T5/LED Hybrid be too little light or would the 8 bulb be too much PAR? My situation. I live in Germany and I’ll move back to the US in 4 years; so I want to make sure the fixture will work in the US. I’ve heard that the fixtures are dual voltage. I contacted ATI Germany and I have not got a response yet. If you have the Led/T5 Hybrid Powermodule, does the power supply controller state 110v-220v? Danke
__________________
9Sticknate on YouTube Red sea Reefer 250, Giesemann Aurora, SPS Reef, Simplicity Skimmer |
03/04/2020, 12:59 PM | #4156 | |
Registered Member
Join Date: May 2017
Posts: 203
|
Quote:
__________________
Keith - ATI North America For more information about our reefkeeping products, subscribe to our YouTube channel! https://www.youtube.com/channel/UCB2sfgtUkmvey-sNjP65TKw Current Tank Info: 175g mixed powered by an ATI LED Powermodule |
|
03/04/2020, 01:06 PM | #4157 | |
Registered Member
Join Date: May 2017
Posts: 203
|
Quote:
__________________
Keith - ATI North America For more information about our reefkeeping products, subscribe to our YouTube channel! https://www.youtube.com/channel/UCB2sfgtUkmvey-sNjP65TKw Current Tank Info: 175g mixed powered by an ATI LED Powermodule |
|
03/08/2020, 09:41 AM | #4158 | |
Registered Member
Join Date: Feb 2014
Location: Glan-Münchweiler Germany
Posts: 203
|
Quote:
Thanks Keith! 🤝
__________________
9Sticknate on YouTube Red sea Reefer 250, Giesemann Aurora, SPS Reef, Simplicity Skimmer |
|
03/26/2020, 07:15 AM | #4159 |
Registered Member
Join Date: Feb 2011
Posts: 33
|
Issue with 8X80W + 4X75W (NO WIFI)
Hi, I bought pre-owned lamp and it was working properly for a few weeks. I have recently replaced bulbs and now issues began. I am running lamp on default settings. When lamp should go to full on mode two bulbs do not start. When I physically connect and disconnect voltage they eventually starts. Reseting doesn't work. I was trying to update firmware via photo-studio but it is not active (guess firmware is valid). What can be the issue here? Any recommendations?
|
05/07/2020, 07:33 AM | #4160 |
Registered Member
Join Date: May 2020
Location: Manchester England
Posts: 9
|
I have a problem with my powermodule hybrid fixture...I purchased it 2and hand and looked to be fine. Only for it to fail a few days later on one channel. I've replaced all the bulbs as I thought the bulbs would be faulty. New bulbs fitted ad it's still doing it. Basically the leds and other t5 channel work perfectly but bulbs 1+ 2 / 7+8 don't. I've programmed them to come on/off at set points but having issues. Last night the channel went off then the bulbs came back on very dimly and the unit was buzzing...I reset the light and it switched them off. Reset everything ready for t5s to come on today. One channel came ones normal as did the leds but the faulty channel didnt come on at all. Reset it again and bulbs have come on. I'm just waiting for 5.30pm when my bulbs should go off to see what they do!!
The whole unit works fine apart from this one channel. This is now sending me crazy lol...turned bulbs round lots of times in the end caps and swapped bulbs about etc but still happening. Faulty control box?? If so how much are these to purchase..I'm in the UK so could be difficult. Many thanks |
05/09/2020, 02:53 AM | #4161 |
Registered Member
Join Date: May 2020
Posts: 2
|
Great looking fixture! Now I just need to figure out how I can rig some LEDs into my 10x54w powermodule.
---------- https://boodmo.com/vehicles/renault-375/kwid-12004/ |
05/11/2020, 08:32 AM | #4162 |
Registered Member
Join Date: May 2015
Location: San Francisco
Posts: 237
|
Hi Fellow Reefers,
I’ve picked up a used second generation 48” 8x54 PM, the LED temperature is running between 50-54c towards peak ranges. Is these temp range normal? All fans are on and running but it seems the LED fans are running at half the speed compared to the T5 fans. What is everyone’s LED temp toward peak ranges? Thanks in advance!!! |
07/01/2020, 09:46 PM | #4163 | |
Registered Member
Join Date: Jun 2015
Location: Edmond, OK
Posts: 9
|
LED Change?
Quote:
|
|
07/02/2020, 09:27 AM | #4164 | |
Registered Member
Join Date: May 2017
Posts: 203
|
Quote:
The SST V2 does not include the UV cluster from the WiFi fixtures in North America. For sake of support cohesion etc we did not opt to bring in the UV cluster in the fixtures until the WiFi was released. In other parts of the world a few of these do exist.
__________________
Keith - ATI North America For more information about our reefkeeping products, subscribe to our YouTube channel! https://www.youtube.com/channel/UCB2sfgtUkmvey-sNjP65TKw Current Tank Info: 175g mixed powered by an ATI LED Powermodule |
|
07/02/2020, 09:53 AM | #4165 | |
Registered Member
Join Date: Jun 2015
Location: Edmond, OK
Posts: 9
|
Quote:
Thanks |
|
07/02/2020, 09:58 AM | #4166 | |
Registered Member
Join Date: May 2017
Posts: 203
|
Quote:
__________________
Keith - ATI North America For more information about our reefkeeping products, subscribe to our YouTube channel! https://www.youtube.com/channel/UCB2sfgtUkmvey-sNjP65TKw Current Tank Info: 175g mixed powered by an ATI LED Powermodule |
|
07/03/2020, 04:26 AM | #4167 |
Registered Member
Join Date: Feb 2011
Posts: 33
|
Any SPS program?
Hi, I am running 8X80, 4x 75 hybrid lamp at default program. I can see my LPS are not doing well and some SPS colours are not as good as I expect. Can you recommend or share well working SPS program for this fixture? What is the optimum height from the top of the water the lamp should be settled on? I am afraid I am burning my corals.
|
07/03/2020, 01:13 PM | #4168 | |
Registered Member
Join Date: May 2017
Posts: 203
|
Quote:
__________________
Keith - ATI North America For more information about our reefkeeping products, subscribe to our YouTube channel! https://www.youtube.com/channel/UCB2sfgtUkmvey-sNjP65TKw Current Tank Info: 175g mixed powered by an ATI LED Powermodule |
|
11/12/2020, 03:04 PM | #4169 |
Registered Member
Join Date: Jan 2017
Posts: 5
|
Hi everyone,
may i ask Whats your led Settings on the News Cluster for the Best in the Blue light Phase without t5. What are you Most famouse flourecens settings pls. Thx in advance |
11/12/2020, 06:11 PM | #4170 | |
Premium Member
Join Date: Apr 2003
Location: Portland OR
Posts: 891
|
Quote:
https://external-content.duckduckgo....peg&f=1&nofb=1
__________________
Feed Your Obsession |
|
11/12/2020, 06:12 PM | #4171 |
Premium Member
Join Date: Apr 2003
Location: Portland OR
Posts: 891
|
Sorry apparently RC doesnt let folks edit posts.
__________________
Feed Your Obsession |
11/13/2020, 05:19 PM | #4172 |
Registered Member
Join Date: Jan 2017
Posts: 5
|
Nice useless Post and the Screen on this Page is all out of Size now.
Good one |
11/13/2020, 09:21 PM | #4173 |
Registered Member
Join Date: Sep 2004
Posts: 556
|
|
11/15/2020, 03:34 PM | #4174 |
Registered Member
Join Date: Jan 2017
Posts: 5
|
|
07/22/2021, 06:03 AM | #4175 |
Registered Member
Join Date: Sep 2004
Location: Belgium, Antwerp
Posts: 6
|
Anyone still using the shedule made by Sahin?
I am struggling to find a good setting for my 4x39w hybrid. Bulbs are 2xB+ & 2xC+. Its the led levels and intensity i am unsure about. Thanks in advance to anyone that can be of help.
__________________
Greets Kristof Current Tank Info: ELOS MIDI, PACSUN BP 140W, BALLING, MP10 |
Thread Tools | |
|
|